9 open source boards using the C44854

Real designs built with the C44854, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the C44854

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the C44854 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 3 has a series resistor on 5 of 5 designs, most often 22 Ω.
  • Pin 4 has a series resistor on 5 of 5 designs, most often 22 Ω.
  • Pin 6 has a capacitor to GND on 5 of 5 designs, most often 1 µF.
  • Pin 13 has a pull-up to 5V on 5 of 5 designs, most often 10 kΩ.
Pin 1Connected to: Not connected 80% · a signal 20%
Pin 2Connected to: 5V 100%
  • Decoupling capacitor on 80% · 100 nF (3), 10 µF (2)
Pin 3Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (5)
Pin 4Connected to: Signal 100%
  • Series resistor on 100% · 22 Ω (5)
Pin 5Connected to: GND 100%
Pin 6Connected to: Signal 100%
  • Capacitor to GND on 100% · 1 µF (5)
Pin 7Connected to: 5V 100%
Pin 12Connected to: Not connected 60% · a signal 40%
Pin 13Connected to: Signal 100%
  • Pull-up to 5V on 100% · 10 kΩ (5)
Pin 14Connected to: 5V 100%
  • Decoupling capacitor on 80% · 100 nF (4)
Pin 15Connected to: GND 100%
Pin 16Connected to: Signal 100%
  • Capacitor to GND on 100% · 22 pF (5)
  • Crystal on 100% · 16 MHz (5)
Pin 17Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (5)
  • Capacitor to GND on 100% · 22 pF (5)
Pin 18Connected to: Not connected 60% · a signal 40%
Pin 23Connected to: GND 100%
Pin 24Connected to: 5V 100%
  • Decoupling capacitor on 80% · 10 µF (2), 100 nF (2)
Pin 33Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (5)
Pin 34Connected to: 5V 100%
  • Decoupling capacitor on 60% · 100 nF (3)
Pin 35Connected to: GND 100%
Pin 41Connected to: Not connected 60% · a signal 40%
Pin 42Connected to: Not connected 100%
Pin 43Connected to: GND 100%
Pin 44Connected to: 5V 100%
  • Decoupling capacitor on 80% · 100 nF (3), 10 µF (2)

21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Grooveboard atmel au by ianklug, Bemini atmel au by ianklug, Railroad keyboard by nopunin10did and Minim by matthewdias.

The C44854 in open source designs

The gallery holds 9 open source boards using the C44854 from 5 GitHub repositories; a typical one measures about 276.2 × 79.8 mm and carries around 78 components.

100% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.

The most starred is Grooveboard choc atmel au by ianklug.

Microcontrollers on boards using the C44854

What boards using the C44854 are built for

C44854: common questions

Where can I find a C44854 reference design?

Each of the 9 boards on this page is a real design using the C44854. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the C44854 pin 3?

Pin 3 has a series resistor on 5 of 5 designs, most often 22 Ω. Counted from the KiCad layouts of 5 open source designs using the C44854.

What resistor goes on the C44854 pin 4?

Pin 4 has a series resistor on 5 of 5 designs, most often 22 Ω. Counted from the KiCad layouts of 5 open source designs using the C44854.

How is the C44854 pin 6 connected?

Pin 6 has a capacitor to GND on 5 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the C44854.

Which microcontrollers do boards using the C44854 use?

Most are built on AVR/Arduino (8) and STM32 (1).

How big is a typical board using the C44854?

The median is 276.2 × 79.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the C44854?

By GitHub stars, Grooveboard choc atmel au by ianklug, with 58 stars.

Can I simulate one of these boards using the C44854 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part