Canpill

IanL7·canpill·hardware/canpill.kicad_pcb

Canpill PCB layout, top view — open source STM32 board by IanL7

About the Canpill PCB

Canpill is an open source STM32 PCB design by IanL7, published on GitHub. It is a 2-layer board measuring 78 × 37 mm, with 51 components from 32 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the USBLC6-2SC6, AMS1117-3.3, MAX3051EKA+T and 74AHC1G08GW-Q100,1. By type, the board carries 16 capacitors, 14 resistors, 7 connectors, 5 ICs, 5 diodes and 2 switches.

It belongs with the dev boards & breakouts and rf & radio designs in this gallery.

From the project

Basic development board based on Phil's Lab stm32 blue pill adaptation with addition of a CAN transceiver and a few other extras

This repository contains the kicad project files and some basic software for the board.

Canpill, from the project README
From the project README

Main components on the Canpill

Canpill bill of materials (BOM)

51 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8T6
U1
1
USBLC6-2SC6
U2
1
AMS1117-3.3
U3
1
MAX3051EKA+T
U4
1
74AHC1G08GW-Q100,1
U5
1
16MHZ
16MHz
Y1
1
TYPE-C-31-M-12
J1
2
5100TR
Keystone Electronics
J2, J3
1
1776112-4
J4
1
Conn_01x20_Pin
J5
1
Conn_01x16_Pin
J6
1
FTSH-105-01-L-DV-K
Samtec Inc.
J7
1
SW_SPDT
SW1
1
SW_Push
SW2
1
RED
D1
1
GREEN
D2
2
D_Schottky
D3, D4
1
NUP2105L
D5
1
120R
FB1
1
10U
10u
C1
Show 12 more
QtyPartRefs
7
100N
100n
C2, C3, C4, C5, C9, C14, C15
1
10N
10n
C6
2
1u
C7, C8
2
10P
10p
C10, C11
2
22U
22u
C12, C13
1
DNP
C16
3
10K
10k
R0, R1, R12
3
1K5
1k5
R2, R5, R11
4
5K1
5k1
R3, R4, R8, R9
2
DNP
R6, R7
1
DNP
R10
1
10k
R13

Canpill design files

The KiCad project lives in the IanL7/canpill repository on GitHub; these links point at the commit this page was built from.

Canpill: common questions

What microcontroller does the Canpill use?

The Canpill is built around the STM32F103C8T6, from the STM32 family.

How big is the Canpill PCB?

The Canpill measures 78 × 37 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Canpill?

51 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Canpill design files?

From the IanL7/canpill repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Canpill design in my own project?

The repository has no license, so all rights stay with IanL7. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Canpill without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards