Scoreboard hardware
ianrrees·scoreboard-hardware
About the Scoreboard hardware PCB
Scoreboard hardware is an open source Microchip SAM PCB design by ianrrees, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 94 mm, with 65 components from 18 distinct parts.
Its main chip is the SAMD10C, from the Microchip SAM family. Other key parts include the XC6206 3.3V SOT23. By type, the board carries 23 resistors, 19 diodes, 10 transistors, 5 capacitors, 2 ICs and 2 jumpers.
From the project
PCB design files for an I2C controlled LED 7-segment digit
Explain the idea behind the top panel Make sure the through hole LED silkscreen is visible after parts are placed
Main components on the Scoreboard hardware
Scoreboard hardware bill of materials (BOM)
65 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206 3.3V SOT23 | SOT-23_Handsoldering | U101 |
| 1 | SAMD10C | SOIC-14_3.9x8.7mm_Pitch1.27mm | U102 |
| 9 | 2N7002 | SOT-23 | Q101, Q102, Q103, Q104, Q105, Q106, Q107, Q108 +1 |
| 1 | FDN340P | SOT-23_Handsoldering | Q110 |
| 1 | I2C | Molex_MicroLatch-53253-0370_03x2.00mm_Straight | J102 |
| 3 | Jumper_NO_Small | solder_jumper | ADDR1, ADDR2, ADDR3 |
| 2 | Jumper_NO_Small | R_0603_HandSoldering | JP101, JP102 |
| 1 | LED | led_0603_HandSoldering | D102 |
| 18 | LED | LED_D5.0mm | D103, D104, D105, D106, D107, D108, D109, D110 +10 |
| 2 | 1uF | C_0603_HandSoldering | C101, C103 |
| 2 | 100nF | C_0603_HandSoldering | C102, C104 |
| 1 | 4.7uF | C_0603_HandSoldering | C105 |
| 2 | 4.7k | R_0603_HandSoldering | R101, R103 |
| 1 | 1k | R_0603_HandSoldering | R102 |
| 1 | 220 | R_0603_HandSoldering | R104 |
| 7 | 10k | R_0603_HandSoldering | R105, R107, R111, R112, R116, R118, R122 |
| 3 | 6.8k | R_0603_HandSoldering | R106, R113, R119 |
| 9 | 100 | R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R108, R109, R110, R114, R115, R117, R120, R121 +1 |
Scoreboard hardware design files
The KiCad project lives in the ianrrees/scoreboard-hardware repository on GitHub; these links point at the commit this page was built from.
- Layoutscoreboard.kicad_pcb
Scoreboard hardware: common questions
What microcontroller does the Scoreboard hardware use?
The Scoreboard hardware is built around the SAMD10C, from the Microchip SAM family.
How big is the Scoreboard hardware PCB?
The Scoreboard hardware measures 100 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Scoreboard hardware?
65 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Scoreboard hardware design files?
From the ianrrees/scoreboard-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Scoreboard hardware design in my own project?
Yes, under the terms of its GPL-3.0 license, which ianrrees chose for the repository.
Can I test firmware for the Scoreboard hardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416