Controller
About the Controller PCB
Controller is an open source PCB design by Iari-Lab, published on GitHub. It is a 6-layer board measuring 94 × 78 mm, with 111 components from 51 distinct parts.
Other key parts include the NVT4858HKZ, 74AHC1G04SE-7, HSP051-4N10, TXS0102DQMR and SN74LVC2G07DBVR. By type, the board carries 41 capacitors, 20 resistors, 12 ICs, 10 diodes, 10 inductors and 8 connectors.
Main components on the Controller
Controller bill of materials (BOM)
111 components, 51 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NVT4858HKZ | NVT4858_NXP | U1 |
| 1 | 74AHC1G04SE-7 74AHC1G04 | SOT-353_SC-70-5 | U2 |
| 2 | HSP051-4N10 | UQFN10_1P04X1P95X0P4_STM | U3, U4 |
| 4 | TXS0102DQMR | IC_TXS0102DQMR | U5, U9, U11, U12 |
| 1 | SN74LVC2G07DBVR | SOT-23-6 | U6 |
| 1 | LDL212PV33R | DFN_V33R_STM | U7 |
| 1 | TVS1401DRBR | VSON8_DRB_TEX | U8 |
| 1 | PCM5101APW PCM5101A | TSSOP-20_4.4x6.5mm_P0.65mm | U10 |
| 2 | 2-5177986-6 MYC-C7Z0XX_M1 | 251779866 | M1, M2 |
| 1 | AG9905-MTB | AG9905MTB | M3 |
| 1 | DMG2305UX-7 DMG2305UX | SOT-23 | Q1 |
| 1 | BCM857BS | SOT-363_SC-70-6 | Q2 |
| 1 | USB1125-GF-B USB1125-GF-B_REVA | GCT_USB1125-GF-B_REVA | J1 |
| 1 | USB4085-GF-A USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4085 | J2 |
| 1 | 473092651 | 0473093351 | J3 |
| 1 | ARJ-146 | ARJ146 | J4 |
| 1 | PJ-320B TRS_LINE_OUT | C18594 | J5 |
| 2 | BWSMA-KE-P001 CON-SMA-EDGE-S | RFSOLUTIONS_CON-SMA-EDGE-S | J6, J8 |
| 1 | 95278-101A12LF | PinHeader_2x06_P2.54mm_Vertical_SMD | J7 |
| 1 | MF-NSML400/12-2 MF-NSML400_12-2 | FUSC3216X120N | F1 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ACM4520-901-2P-T000 900@100MHz | ACM4520_TDK | FL1 |
| 2 | M55-7002042R M55-6002042R | HARWIN_M55-6002042R | JM1, JM2 |
| 1 | SKRTLAE010 FPGA reset | SW_SKRTLAE010 | SW1 |
| 1 | SMAJ58A | D_SMA | D1 |
| 3 | A-SP136G2C-C01-3T LED | LED_0402_1005Metric | D2, D9, D10 |
| 2 | SBR05M60BLP-7 SBR05M100BLP-7 | RECTIFIER_SBR05M100BLP-7 | D3, D4 |
| 4 | PESD5V0U2BM,315 | PESD3V3L2UM315 | D5, D6, D7, D8 |
| 1 | GZ1608D121TF 120R@100MHz | L_0603_1608Metric | FB2 |
| 1 | GZ1608D221TF 220R@100MHz | L_0603_1608Metric | FB4 |
| 1 | 744231091 | WE-CNSW_08058 | L1 |
| 1 | 74438356018 1.8uH | L_Changjiang_FNR4020S | L2 |
| 6 | 742792096 1 kOhms@100MHz | L_0805_2012Metric | L3, L4, L5, L6, L7, L8 |
| 1 | CL03A104KQ3NNNC 0.01uF | C_0201_0603Metric | C1 |
| 2 | CL10C222JB8NNNC 2.2nF | C_0603_1608Metric | C2, C40 |
| 13 | 0201X104K160NT 0.1uF | C_0201_0603Metric | C3, C4, C15, C17, C18, C19, C24, C25 +5 |
| 4 | GRM155R71H104KE14D 0.1uF/50V | C_0402_1005Metric | C5, C6, C14, C34 |
| 4 | CC0805KRX7R0BB103 10nF/100V | C_0805_2012Metric | C7, C8, C9, C11 |
| 3 | 1206B102K202NT 1nF/2kV | C_1206_3216Metric | C10, C43, C44 |
| 6 | CL10A106KP8NNNC 10uF | C_0603_1608Metric | C12, C21, C22, C23, C28, C31 |
| 1 | CL03A105MP3NSNC 1uF | C_0201_0603Metric | C13 |
| 1 | CL21A226MAQNNNE 22uF | C_0805_2012Metric | C16 |
| 1 | RVT1C101M0605 100uF | CP_Elec_6.3x5.9 | C20 |
| 2 | CL10A225KO8NNNC 2.2uF | C_0603_1608Metric | C27, C37 |
| 2 | GRM3195C2A472JA01D 4.7nF | C_1206_3216Metric | C29, C30 |
| 1 | 0201CG680J250NT 68pF | C_0201_0603Metric | C35 |
| 3 | 0 | R_0603_1608Metric | R1, R7, R8 |
| 3 | 1GNF4702C 47k | R_0201_0603Metric | R2, R6, R9 |
| 5 | 0402WGF470LTCE 470 | R_0402_1005Metric | R3, R5, R12, R14, R16 |
| 4 | ERJ-1GNJ512C 5.1k | R_0201_0603Metric | R4, R11, R17, R18 |
| 1 | ERJ-1GNF1002C 10k | R_0201_0603Metric | R10 |
| 4 | NQ02WGJ0750TCE 75 | R_0402_1005Metric | R13, R31, R32, R33 |
Controller design files
The KiCad project lives in the Iari-Lab/OpenAcousticCamera repository on GitHub; these links point at the commit this page was built from.
Controller: common questions
How big is the Controller PCB?
The Controller measures 94 × 78 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Controller?
111 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Controller design files?
From the Iari-Lab/OpenAcousticCamera repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Controller design in my own project?
The repository has no license, so all rights stay with Iari-Lab. Use it as a reference, and ask the author before reusing the design.
