7 open source boards using the LDL212PV33R

Real designs built with the LDL212PV33R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the LDL212PV33R

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LDL212PV33R connects to, and the resistors, capacitors and other passives placed on it.

  • The VOUT pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 100 nF).
  • The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 10 µF).
  • The SENSE pin is tied to 3.3V on 6 of 7 designs.
  • The EN pin is tied to 4.5V on 6 of 7 designs.
GNDpin 1Connected to: GND 100%
SENSEpin 2Connected to: 3.3V 86%
VOUTpin 3Connected to: 3.3V 86%
  • Decoupling capacitor on 100% · 4.7 µF (5), 100 nF (4), 1 µF (3)
VINpin 4Connected to: 4.5V 86%
  • Decoupling capacitor on 100% · 1 µF (6), 10 µF (2)
NCpin 5Connected to: Not connected 100%
ENpin 6Connected to: 4.5V 86%
GND_7pin 7Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Controller by Iari-Lab, MINIREX G473 by mathieupommery, YecnodF405 by limiez1011 and YecnodF405 by lmiez.

The LDL212PV33R in open source designs

The gallery holds 7 open source boards using the LDL212PV33R from 7 GitHub repositories; a typical one measures about 40 × 40 mm and carries around 104 components.

86% use four copper layers or more, and 57% carry an open source license.

The most starred is Controller by Iari-Lab.

Microcontrollers on boards using the LDL212PV33R

What boards using the LDL212PV33R are built for

LDL212PV33R: common questions

Where can I find a LDL212PV33R reference design?

Each of the 7 boards on this page is a real design using the LDL212PV33R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LDL212PV33R VOUT pin?

The VOUT pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the LDL212PV33R.

What decoupling capacitors do designs use on the LDL212PV33R VIN pin?

The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the LDL212PV33R.

How is the LDL212PV33R SENSE pin connected?

The SENSE pin is tied to 3.3V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the LDL212PV33R.

What parts are used alongside the LDL212PV33R?

The DRV8871DDA, ICM-42688-P, MAX7456EUI_, MP4420GJ-P and MS561101BA03-50 appear in the most repositories here.

Which microcontrollers do boards using the LDL212PV33R use?

Most are built on STM32 (5) and ESP32 (1).

How big is a typical board using the LDL212PV33R?

The median is 40 × 40 mm, and 14% are two-layer designs.

What is the most popular open source board using the LDL212PV33R?

By GitHub stars, Controller by Iari-Lab, with 26 stars.

Can I simulate one of these boards using the LDL212PV33R before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part