7 open source boards using the TXS0102DQMR
Real designs built with the TXS0102DQMR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pc healthypi move sensor v9
Protocentral
38.5 × 38.5 mm88 parts6LMIT156Board 2 New
Triksha-health
50 × 50 mm84 parts4LNo license0Controller
Iari-Lab
94 × 78 mm111 parts6LNo license26Controller
krasin
105 × 72 mm108 parts4LCERN-OHL-S-2.01Board 2
Triksha-health
50 × 50 mm83 parts4LNo license0DVI Adapter board
openconcepts-ar
34.6 × 28.4 mm49 parts2LCustom license1VGA Adapter board
openconcepts-ar
19.2 × 25.8 mm36 parts2LCustom license1
How designs wire the TXS0102DQMR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TXS0102DQMR connects to, and the resistors, capacitors and other passives placed on it.
- The OE pin is tied to 1.8V on 4 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 1.8V 80% · a signal 20% | — |
| GNDpin 4 | Connected to: GND 80% · a signal 20% | — |
| OEpin 5 | Connected to: 1.8V 80% · a signal 20% | — |
| VCCBpin 8 | Connected to: 3.3V 80% · a signal 20% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pc healthypi move sensor v9 by Protocentral, Controller by Iari-Lab, Controller by krasin and DVI Adapter board by openconcepts-ar.
The TXS0102DQMR in open source designs
The gallery holds 7 open source boards using the TXS0102DQMR from 5 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 84 components.
71% use four copper layers or more, and 29% carry an open source license.
The most starred is Pc healthypi move sensor v9 by Protocentral.
Parts used alongside the TXS0102DQMR
What boards using the TXS0102DQMR are built for
TXS0102DQMR: common questions
Where can I find a TXS0102DQMR reference design?
Each of the 7 boards on this page is a real design using the TXS0102DQMR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TXS0102DQMR OE pin connected?
The OE pin is tied to 1.8V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TXS0102DQMR.
How big is a typical board using the TXS0102DQMR?
The median is 50 × 50 mm, and 29% are two-layer designs.
What is the most popular open source board using the TXS0102DQMR?
By GitHub stars, Pc healthypi move sensor v9 by Protocentral, with 156 stars.
Can I simulate one of these boards using the TXS0102DQMR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.