HardLabs

S-Band-Antenna

ICDT-Inatel-Cubesat-Design-Team·S-Band-Antenna·hardware/PCB/Antenna.kicad_pcb

S-Band-Antenna PCB layout, top view — open source board by ICDT-Inatel-Cubesat-Design-Team

About the S-Band-Antenna PCB

S-Band-Antenna is an open source PCB design by ICDT-Inatel-Cubesat-Design-Team, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 82.4 × 89.4 mm, with 1 components from 1 distinct parts.

Other key parts include the C496551.

It belongs with the rf & radio and science & space designs in this gallery.

From the project

S-Band RHCP 2.45 GHz Patch Antenna for 1U CubeSats

Technical Parameters - Center Frequency: 2.45 GHz - Axial Ratio Bandwidth: 14 MHz (2443 – 2457 MHz for AR < 3 dB) - Peak Realized Gain: 7.58 dBi - Polarization: Right-Hand Circular Polarization (RHCP) - Connector Type: Right-Angle SMA

docs: Technical documentation and datasheets. hardware: Core hardware files. 3D: 3D models (.step). Fabrication: BOM and Gerber files for JLCPCB manufacturing. PCB: KiCad schematics and layout design. simulation: Ansys HFSS simulation and data files.

S-Band-Antenna, from the project README
From the project README

Main components on the S-Band-Antenna

C496551

S-Band-Antenna bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C496551
SMA
U1

S-Band-Antenna design files

The KiCad project lives in the ICDT-Inatel-Cubesat-Design-Team/S-Band-Antenna repository on GitHub; these links point at the commit this page was built from.

S-Band-Antenna: common questions

How big is the S-Band-Antenna PCB?

The S-Band-Antenna measures 82.4 × 89.4 mm, has 2 copper layers and is 1.61 mm thick.

How many components are on the S-Band-Antenna?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the S-Band-Antenna design files?

From the ICDT-Inatel-Cubesat-Design-Team/S-Band-Antenna repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the S-Band-Antenna design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which ICDT-Inatel-Cubesat-Design-Team chose for the repository.

Similar boards