Icesio V2

icelord75·icesio·hardware/icesio_V2/icesio_V2/icesio_V2.kicad_pcb

Icesio V2 PCB layout, top view — open source PIC board by icelord75

About the Icesio V2 PCB

Icesio V2 is an open source PIC PCB design by icelord75, published on GitHub under the MIT license. It is a 2-layer board measuring 25.7 × 27.6 mm, with 39 components from 24 distinct parts.

Its main chip is the PIC16F19197-I_MR, from the PIC family. Other key parts include the HMC5883L-TR, NCP5623CMUTBG, 24CW1280T-I/CS0668 and CASIO3208. By type, the board carries 15 capacitors, 6 ICs, 5 resistors, 1 transformer, 1 diode and 1 inductor.

It belongs with the wearables, sensors and power & battery designs in this gallery.

From the project

iCESIO - replacement board for CASIO 3208 modules (CA-53, CA-506 watches)

A replacement brain for the CASIO 3208 module — the one inside the CA-53W and CA-506 calculator watches. iCESIO keeps the original case, LCD, keypad and buzzer, and swaps the stock chip for a PIC16 microcontroller with an accelerometer, a compass, an environmental sensor and a full RGB backlight.

- Hardware - Firmware - What works - Using the watch - Building - Configuration - Repository layout - Known issues - Roadmap - Related projects - License

Icesio V2, from the project README
From the project README

Main components on the Icesio V2

PIC16F19197-I_MRHMC5883L-TRNCP5623CMUTBG24CW1280T-I/CS0668CASIO3208

Icesio V2 bill of materials (BOM)

39 components, 24 distinct parts.

QtyPartRefs
1
PIC16F19197-I_MR
IC1
1
HMC5883L-TR
IC2
1
NCP5623CMUTBG
IC3
1
24CW1280T-I/CS0668
IC4
1
CASIO3208
U$1
1
—
U$2
1
MMA8451QT
AC1
8
—
CLK0, DAT0, GND0, GND.0, MCLR0, RX0, TX0, VCC0
1
BME280
HM1
1
PDTC114TYM
T1
1
SMD0404
D2
1
CASIO
L1
1
0,1
C1
2
10n
C2, C4
3
0,27
C3, C13, C14
2
0.1
C5, C12
1
4.7u
C6
2
0.22
C7, C10
2
100n
C8, C9
2
1
C11, C15
Show 4 more
QtyPartRefs
1
62K
R1
1
10k
R2
1
470
R3
2
4.7k
R5, R6

Icesio V2 design files

The KiCad project lives in the icelord75/icesio repository on GitHub; these links point at the commit this page was built from.

Icesio V2: common questions

What microcontroller does the Icesio V2 use?

The Icesio V2 is built around the PIC16F19197-I_MR, from the PIC family.

How big is the Icesio V2 PCB?

The Icesio V2 measures 25.7 × 27.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Icesio V2?

39 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Icesio V2 design files?

From the icelord75/icesio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Icesio V2 design in my own project?

Yes, under the terms of its MIT license, which icelord75 chose for the repository.

Can I test firmware for the Icesio V2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in icesio

Similar boards