Icesio0
icelord75·icesio·kicad/icesio0/icesio0.kicad_pcb
About the Icesio0 PCB
Icesio0 is an open source PIC PCB design by icelord75, published on GitHub under the MIT license. It is a 2-layer board measuring 25.7 × 27.6 mm, with 39 components from 24 distinct parts.
Its main chip is the PIC16F19197-I_MR, from the PIC family. Other key parts include the HMC5883L-TR, NCP5623CMUTBG, 24CW1280T-I/CS0668 and CASIO3208. By type, the board carries 15 capacitors, 6 ICs, 5 resistors, 1 transformer, 1 diode and 1 inductor.
It belongs with the wearables, sensors and power & battery designs in this gallery.
From the project
iCESIO - replacement board for CASIO 3208 modules (CA-53, CA-506 watches)
A replacement brain for the CASIO 3208 module — the one inside the CA-53W and CA-506 calculator watches. iCESIO keeps the original case, LCD, keypad and buzzer, and swaps the stock chip for a PIC16 microcontroller with an accelerometer, a compass, an environmental sensor and a full RGB backlight.
- Hardware - Firmware - What works - Using the watch - Building - Configuration - Repository layout - Known issues - Roadmap - Related projects - License

Main components on the Icesio0
Icesio0 bill of materials (BOM)
39 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F19197-I_MR | QFN50P900X900X100-65N | IC1 |
| 1 | HMC5883L-TR | 16-PIN-LPCC | IC2 |
| 1 | NCP5623CMUTBG | NCP5623BMUTBG | IC3 |
| 1 | 24CW1280T-I/CS0668 | CSP | IC4 |
| 1 | CASIO3208 | CASIO3208 | U$1 |
| 1 | — | ICELORD_SMALL | U$2 |
| 1 | MMA8451QT | PQFN50P300X300X100-16N | AC1 |
| 8 | — | SMD1,27-2,54 | CLK0, DAT0, GND0, GND.0, MCLR0, RX0, TX0, VCC0 |
| 1 | BME280 | BME280 | HM1 |
| 1 | PDTC114TYM | SOT883(B) | T1 |
| 1 | SMD0404 | WL-SFCC_0404 | D2 |
| 1 | CASIO | L4516C | L1 |
| 1 | 0,1 | RESC0402_L | C1 |
| 2 | 10n | RESC0402_L | C2, C4 |
| 3 | 0,27 | RESC0402_L | C3, C13, C14 |
| 2 | 0.1 | RESC0402_L | C5, C12 |
| 1 | 4.7u | RESC0402_L | C6 |
| 2 | 0.22 | RESC0402_L | C7, C10 |
| 2 | 100n | RESC0402_L | C8, C9 |
| 2 | 1 | RESC0402_L | C11, C15 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 62K | R0402 | R1 |
| 1 | 10k | R0402 | R2 |
| 1 | 470 | R0402 | R3 |
| 2 | 4.7k | R0402 | R5, R6 |
Icesio0 design files
The KiCad project lives in the icelord75/icesio repository on GitHub; these links point at the commit this page was built from.
Icesio0: common questions
What microcontroller does the Icesio0 use?
The Icesio0 is built around the PIC16F19197-I_MR, from the PIC family.
How big is the Icesio0 PCB?
The Icesio0 measures 25.7 × 27.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Icesio0?
39 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Icesio0 design files?
From the icelord75/icesio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Icesio0 design in my own project?
Yes, under the terms of its MIT license, which icelord75 chose for the repository.
Can I test firmware for the Icesio0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in icesio
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379