SmartRehabBar
ichueca·SmartRehabBar·PCB_SmartRehab V3/PCB_SmartRehab.kicad_pcb
About the SmartRehabBar PCB
SmartRehabBar is an open source ESP32 PCB design by ichueca, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 120.7 × 59.7 mm, with 17 components from 12 distinct parts.
Its main chip is the ESP32-C3 Supermini, from the ESP32 family. By type, the board carries 5 ICs, 3 capacitors and 2 resistors.
It belongs with the iot & wireless designs in this gallery.
From the project
Diseño de un dispositivo inteligente que se acopla a las barras de sujeción utilizadas en sesiones de rehabilitación física
SmartRehabBar es un proyecto centrado en el desarrollo de un sistema inteligente que se integra en barras de rehabilitación, permitiendo medir de forma objetiva la fuerza de apoyo ejercida por pacientes durante ejercicios de recuperación funcional.
El sistema utiliza células de carga para registrar la carga aplicada, enviando los datos en tiempo real a una plataforma web para su visualización. Esto permite a los profesionales sanitarios realizar un seguimiento cuantitativo de la evolución del paciente.
SmartRehabBar bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | ~ | Conn5mm_02x01 | U1, U2, U3, U4, U5 |
| 1 | ~ | ESP32-C3 Supermini | ESP32-C3 |
| 2 | ~ | HX711 | HX711-DER1, HX711-IZQ1 |
| 1 | ~ | Interruptor3Pines | Inter1 |
| 1 | ~ | MCP73871 | MCP1 |
| 1 | ~ | TPS63020 | TPS63020-5V1 |
| 1 | ~ | USB-C | USB-C1 |
| 1 | 1uF | C_Rect_L7.0mm_W6.0mm_P5.00mm | C1 |
| 1 | 220uF | CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 10uF | C_Radial_D5.0mm_H11.0mm_P2.00mm | C3 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
SmartRehabBar design files
The KiCad project lives in the ichueca/SmartRehabBar repository on GitHub; these links point at the commit this page was built from.
SmartRehabBar: common questions
What microcontroller does the SmartRehabBar use?
The SmartRehabBar is built around the ESP32-C3 Supermini, from the ESP32 family.
How big is the SmartRehabBar PCB?
The SmartRehabBar measures 120.7 × 59.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SmartRehabBar?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the SmartRehabBar design files?
From the ichueca/SmartRehabBar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SmartRehabBar design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which ichueca chose for the repository.
Can I test firmware for the SmartRehabBar without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k