HardLabs

Spotify application

iconner22·spotify_application·pcbs/Spotify_PCB.kicad_pcb

Spotify application PCB layout, top view — open source RP2040/RP2350 board by iconner22

About the Spotify application PCB

Spotify application is an open source RP2040/RP2350 PCB design by iconner22, published on GitHub. It is a 2-layer board measuring 128 × 101.3 mm, with 20 components from 14 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 9 switches, 4 diodes, 4 resistors and 1 IC.

From the project

Code and schematics for raspberry pi spotify interface. Integrates physical components with a raspberry pi to control spotify developer playback API.

Main components on the Spotify application

Pico

Spotify application bill of materials (BOM)

20 components, 14 distinct parts.

QtyPartRefs
1
Pico
U1
1
16x2 LCD Display
DS1
1
10K POT
RV1
1
Prev
SW1
1
Next
SW3
1
Shuffle
SW4
1
P2
SW5
1
P3
SW6
1
Set
SW7
1
P1
SW8
1
Play/Pause
SW9
1
RST
SW10
4
LED
D1, D2, D3, D4
4
1K
R1, R2, R3, R4

Spotify application design files

The KiCad project lives in the iconner22/spotify_application repository on GitHub; these links point at the commit this page was built from.

Spotify application: common questions

What microcontroller does the Spotify application use?

The Spotify application is built around the Pico, from the RP2040/RP2350 family.

How big is the Spotify application PCB?

The Spotify application measures 128 × 101.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Spotify application?

20 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Spotify application design files?

From the iconner22/spotify_application repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Spotify application design in my own project?

The repository has no license, so all rights stay with iconner22. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Spotify application without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards