Volumetric display
About the Volumetric display PCB
Volumetric display is an open source PCB design by idlehandsdev, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 23 × 120 mm, with 70 components from 18 distinct parts.
Other key parts include the feather, SSD1309_TRANSPARENT_OLED, MPM36XX and MPU-6050. By type, the board carries 28 resistors, 26 capacitors, 13 ICs, 1 connector, 1 speaker and 1 diode.
It belongs with the displays & leds, dev boards & breakouts and robotics & motion designs in this gallery.
From the project
TENEX OLED Displays
Control up to ten transparent OLED displays using your favourite Feather board.
Find the BOM here: https://www.findchips.com/org/10-open-hardware/list/208915-tenex-project
Shield: [![CC BY-SA 4.0][cc-by-sa-shield]][cc-by-sa]
This work is licensed under a [Creative Commons Attribution-ShareAlike 4.0 International License][cc-by-sa].
[cc-by-sa]: http://creativecommons.org/licenses/by-sa/4.0/ [cc-by-sa-image]: https://licensebuttons.net/l/by-sa/4.0/88x31.png [cc-by-sa-shield]: https://img.shields.io/badge/License-CC%20BY--SA%204.0-lightgrey.svg
Main components on the Volumetric display
Volumetric display bill of materials (BOM)
70 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | feather | PCB_FeatherWing | U1 |
| 10 | SSD1309_TRANSPARENT_OLED SSD1309_transparent_oled | FCI_62674-241121ALF | U2, U3, U4, U5, U6, U8, U9, U10 +2 |
| 1 | MPM36XX | MPM3606AGQV-Z | U7 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U13 |
| 1 | Barrel_Jack_Switch | BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | Speaker_Crystal | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | LS1 |
| 1 | RB521S30T1G | D_SOD-523 | D1 |
| 6 | 10UF 10uF | C_0805_2012Metric | C1, C5, C11, C14, C23, C29 |
| 1 | 22UF 22uF | C_0805_2012Metric | C2 |
| 8 | 0.1UF 0.1uF | C_0805_2012Metric | C3, C6, C8, C12, C15, C17, C24, C30 |
| 11 | 4.7UF 4.7uF | C_0805_2012Metric | C4, C7, C9, C10, C13, C16, C19, C22 +3 |
| 1 | 5.1K 1% | R_0805_2012Metric | R1 |
| 11 | 100K | R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9 +3 |
| 10 | 910K 1% | R_0805_2012Metric | R12, R13, R14, R15, R16, R21, R22, R23 +2 |
| 1 | 75K | R_0805_2012Metric | R18 |
| 1 | 24K | R_0805_2012Metric | R20 |
| 3 | 4.7K | R_0805_2012Metric | R26, R27, R28 |
| 1 | 470R | R_0805_2012Metric | R29 |
Volumetric display design files
The KiCad project lives in the idlehandsdev/volumetric_display repository on GitHub; these links point at the commit this page was built from.
Volumetric display: common questions
How big is the Volumetric display PCB?
The Volumetric display measures 23 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Volumetric display?
70 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Volumetric display design files?
From the idlehandsdev/volumetric_display repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Volumetric display design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which idlehandsdev chose for the repository.
atopile
AxxAxx
willem-pennings
pa3gsb