FlowSensor
ieb·FlowSensor·pcb/esp32c-flowsensor/esp32c-flowsensor.kicad_pcb
About the FlowSensor PCB
FlowSensor is an open source ESP32 PCB design by ieb, published on GitHub. It is a 2-layer board measuring 85.1 × 40 mm, with 36 components from 22 distinct parts.
Its main chip is the ESP32-C3-Waveshare, from the ESP32 family. Other key parts include the AMS1117-5.0. By type, the board carries 11 resistors, 7 capacitors, 6 diodes, 5 connectors, 3 transistors and 2 ICs.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
Temperature Dispersion Flow Sensor for Raw Water Cooled marine engines.
This project has got to the state of building a prototype sensor, but testing has indicated that measuring the temperature and rate of change of temperature of the exaust elbow on a water cooled exhaust relative to the engine coolant temperature is a very effective early warning system. The heat source, engine exhaust is in the kw range. The cooling source is the same, when the cooling source reduces the temperature of the water cooled elbo rises rapidly triggering an alarm within 5s, evidenced by live data recorded from 2 engine overheats, one slow and one fast. On that basis, I am not…
Main components on the FlowSensor
FlowSensor bill of materials (BOM)
36 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-C3-Waveshare | ESP-C3-Zero-Waveshare | U3 |
| 2 | BC817 | SOT-23 | Q1, Q3 |
| 1 | IRF540N | TO-220-3_Horizontal_TabDown | Q2 |
| 1 | NTC1 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | NTC2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Heater | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J3 |
| 1 | ALARM | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | 12V In | JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J5 |
| 1 | 500mA | R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | F1 |
| 1 | 5A | Fuse_Blade_ATO_directSolder | F2 |
| 1 | US1J | D_SMA | D1 |
| 2 | SMAJ18CA | D_SMA | D2, D3 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5, D6 |
| 3 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C7 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 1 | 47uF | CP_Elec_6.3x5.4 | C4 |
| 1 | 1uF | C_1206_3216Metric | C5 |
| 8 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R7, R8, R9, R10, R11 |
| 1 | 4K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
FlowSensor design files
The KiCad project lives in the ieb/FlowSensor repository on GitHub; these links point at the commit this page was built from.
FlowSensor: common questions
What microcontroller does the FlowSensor use?
The FlowSensor is built around the ESP32-C3-Waveshare, from the ESP32 family.
How big is the FlowSensor PCB?
The FlowSensor measures 85.1 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FlowSensor?
36 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the FlowSensor design files?
From the ieb/FlowSensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FlowSensor design in my own project?
The repository has no license, so all rights stay with ieb. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FlowSensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k