P2000t joystick slot2-eeprom

ifilot·p2000t-joystick-cartridge·pcb/p2000t-joystick-slot2-eeprom/p2000t-joystick-slot2-eeprom.kicad_pcb

P2000t joystick slot2-eeprom PCB layout, top view — open source board by ifilot

About the P2000t joystick slot2-eeprom PCB

P2000t joystick slot2-eeprom is an open source PCB design by ifilot, published on GitHub. It is a 2-layer board measuring 80 × 100 mm, with 45 components from 13 distinct parts.

Other key parts include the 74HC02, 74HC74, 74HC138 and SST39SF010. By type, the board carries 19 diodes, 16 resistors, 4 ICs, 4 capacitors, 1 connector and 1 switch.

From the project

Philips P2000T SLOT2 cartridge to interface with Atari 2600-style joysticks

This cartridge enables the use of Atari 2600-style joysticks with the P2000T by emulating keyboard inputs. It uses an EEPROM and a few logic chips to translate joystick button presses into keystrokes, seamlessly integrating with the P2000T's keyboard polling process.

The P2000T features a matrix keyboard design, where each key is positioned at the intersection of a specific row and column. The rows are connected to the address pins, while the columns are connected to the data pins. The keyboard matrix consists of 10 rows and 8 columns.

P2000t joystick slot2-eeprom, from the project README
From the project README

Main components on the P2000t joystick slot2-eeprom

P2000t joystick slot2-eeprom bill of materials (BOM)

45 components, 13 distinct parts.

QtyPartRefs
1
74HC02
U1
1
74HC74
U2
1
74HC138
U3
1
SST39SF010
U4
1
P2000T Port 2
J2
1
SW_DIP_x02
SW1
8
1N4148
D1, D2, D3, D4, D5, D6, D7, D8
11
LED
D9, D10, D11, D12, D13, D14, D15, D16 +3
4
.1uF
C1, C2, C3, C4
2
10k
R1, R2
2
1k
R3, R4
11
330
R5, R6, R7, R8, R9, R10, R11, R12 +3
1
1k
RN1

P2000t joystick slot2-eeprom design files

The KiCad project lives in the ifilot/p2000t-joystick-cartridge repository on GitHub; these links point at the commit this page was built from.

P2000t joystick slot2-eeprom: common questions

How big is the P2000t joystick slot2-eeprom PCB?

The P2000t joystick slot2-eeprom measures 80 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the P2000t joystick slot2-eeprom?

45 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the P2000t joystick slot2-eeprom design files?

From the ifilot/p2000t-joystick-cartridge repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the P2000t joystick slot2-eeprom design in my own project?

The repository has no license, so all rights stay with ifilot. Use it as a reference, and ask the author before reusing the design.

More boards in p2000t-joystick-cartridge