146 open source boards using the 74HC74

Real designs built with the 74HC74, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

146 boardsClear filters|Most starred

How designs wire the 74HC74

Read from the KiCad layouts of 95 open source designs, one per repository: what each pin of the 74HC74 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 56 of 95 designs, most often 100 nF (then 10 nF).
  • The S pins is tied to 5V on 67% of them (not connected on 14, GND on 7, a signal on 42).
Spin 4, 10Connected to: 5V 67% · a signal 22%
GNDpin 7Connected to: GND 95%
VCCpin 14Connected to: 5V 94%
  • Decoupling capacitor on 59% · 100 nF (53), 10 nF (2), 1 µF (2)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet WIFI by Duet3D, OpenThereminV4 by GaudiLabs, PortableTerminal by profdc9 and Easy z80 by skiselev.

The 74HC74 in open source designs

The gallery holds 146 open source boards using the 74HC74 from 98 GitHub repositories; a typical one measures about 119 × 100 mm and carries around 77 components.

75% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.

The most starred is Duet WIFI by Duet3D.

Microcontrollers on boards using the 74HC74

74HC74: common questions

Where can I find a 74HC74 reference design?

Each of the 146 boards on this page is a real design using the 74HC74. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC74 VCC pin?

The VCC pin has a decoupling capacitor on 56 of 95 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 95 open source designs using the 74HC74.

How is the 74HC74 S pin connected?

The S pins is tied to 5V on 67% of them (not connected on 14, GND on 7, a signal on 42). Counted from the KiCad layouts of 95 open source designs using the 74HC74.

What parts are used alongside the 74HC74?

The 74HC04, 74HC00, 74HC32, 74HC14 and 74HC08 appear in the most repositories here.

Which microcontrollers do boards using the 74HC74 use?

Most are built on AVR/Arduino (14), PIC (5), Raspberry Pi (3) and RP2040/RP2350 (2).

How big is a typical board using the 74HC74?

The median is 119 × 100 mm, and 75% are two-layer designs.

What is the most popular open source board using the 74HC74?

By GitHub stars, Duet WIFI by Duet3D, with 258 stars.

Can I simulate one of these boards using the 74HC74 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part