33 open source boards using the SST39SF010

Real designs built with the SST39SF010, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

33 boardsClear filters|Most starred

How designs wire the SST39SF010

Read from the KiCad layouts of 29 open source designs, one per repository: what each pin of the SST39SF010 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 16Connected to: GND 83%
VCCpin 32Connected to: VCC 83%
  • Decoupling capacitor on 34% · 100 nF (7), 1 µF (1)

29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SEthernet/30 PDS Ethernet card for Macintosh SE/30 by rhalkyard, 2063-Z80 by Z80-Retro, Abn6502 by AndersBNielsen and RIPPLE-IDE by LIV2.

The SST39SF010 in open source designs

The gallery holds 33 open source boards using the SST39SF010 from 29 GitHub repositories; a typical one measures about 116.8 × 100 mm and carries around 56 components.

67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is SEthernet/30 PDS Ethernet card for Macintosh SE/30 by rhalkyard.

Microcontrollers on boards using the SST39SF010

What boards using the SST39SF010 are built for

SST39SF010: common questions

Where can I find a SST39SF010 reference design?

Each of the 33 boards on this page is a real design using the SST39SF010. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SST39SF010?

The 74HC138, 74HC32, 74HCT245, 74LS32 and MAX232 appear in the most repositories here.

Which microcontrollers do boards using the SST39SF010 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the SST39SF010?

The median is 116.8 × 100 mm, and 67% are two-layer designs.

What is the most popular open source board using the SST39SF010?

By GitHub stars, SEthernet/30 PDS Ethernet card for Macintosh SE/30 by rhalkyard, with 164 stars.

Can I simulate one of these boards using the SST39SF010 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part