HardLabs

PICO SST39SF0x0 Programmer

ifilot·pico-sst39sf0x0-programmer·pcb/pico-sst39sf0x0-pcb/pico-sst39sf0x0-pcb.kicad_pcb

PICO SST39SF0x0 Programmer PCB layout, top view — open source RP2040/RP2350 board by ifilot

About the PICO SST39SF0x0 Programmer PCB

PICO SST39SF0x0 Programmer is an open source RP2040/RP2350 PCB design by ifilot, published on GitHub. It is a 2-layer board measuring 101.6 × 54.6 mm, with 52 components from 12 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the C5608 and ZIF SOCKET. By type, the board carries 24 transistors, 15 resistors, 5 ICs, 4 capacitors, 3 diodes and 1 switch.

It belongs with the usb & debug tools designs in this gallery.

From the project

PICO based flasher utility for SST39SF0x0 EEPROM chips

This folder contains three subfolders containing the KiCAD files for three PCBs

pico-sst39sf0x0-pcb: Core PCB containing the Raspberry Pi PICO, the ZIF socket and the required interfacing circuitry. p2000t-slot1-adapter-board: Adapter board for non-invasive extraction of data from SLOT1 cartridges for the P2000T * plcc32-adapter-board: Adapter board for interfacing the DIP32 SST39SF0x0 chips with the PLCC32 variant.

Main components on the PICO SST39SF0x0 Programmer

C5608ZIF SOCKETPico

PICO SST39SF0x0 Programmer bill of materials (BOM)

52 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
3
C5608
74HC573
U1, U3, U4
1
ZIF SOCKET
U2
1
Pico
U5
24
C78284
BSS138
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +16
1
SW_Push
SW1
1
C95872
M7
D1
1
READ
D2
1
WRITE
D3
4
C1790
.1uF
C1, C2, C3, C4
1
C17414
10K
R1
2
C28636
560
R2, R3
12
C110924
10k
RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 +4

PICO SST39SF0x0 Programmer design files

The KiCad project lives in the ifilot/pico-sst39sf0x0-programmer repository on GitHub; these links point at the commit this page was built from.

PICO SST39SF0x0 Programmer: common questions

What microcontroller does the PICO SST39SF0x0 Programmer use?

The PICO SST39SF0x0 Programmer is built around the Pico, from the RP2040/RP2350 family.

How big is the PICO SST39SF0x0 Programmer PCB?

The PICO SST39SF0x0 Programmer measures 101.6 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PICO SST39SF0x0 Programmer?

52 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PICO SST39SF0x0 Programmer design files?

From the ifilot/pico-sst39sf0x0-programmer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PICO SST39SF0x0 Programmer design in my own project?

The repository has no license, so all rights stay with ifilot. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PICO SST39SF0x0 Programmer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards