He piantor-42

ihsinoky·he-piantor-42·hardware/tscircuit/qualification/eda-004d/evidence/processes/patched-smoke-conversion/smoke.kicad_pcb

About the He piantor-42 PCB

He piantor-42 is an open source RP2040/RP2350 PCB design by ihsinoky, published on GitHub under the MIT license. It is a 2-layer board measuring 20 × 16 mm, with 1 components from 1 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family.

From the project

CONVERSIONBLOCKED / D1FOOTPRINTLIBRARYIDCOLLISION, Issue #77. Limited object parity passes after three source-file repairs. Complete pre-route acceptance fails: distinct footprints share tscircuit:chip`; real ERC still has three errors and sixteen warnings. Smoke initial/fresh ro

See report, frozen acceptance, STOP, patch and source/build provenance. Original converter source is retained once as the downloaded commit archive. Existing locks, fixture, original release archive and checkers are referenced by baseline commit/path/hash in evidence/references.json; none are…

Main components on the He piantor-42

RP2040

He piantor-42 bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040 Raspberry Pi		U1

He piantor-42 design files

The KiCad project lives in the ihsinoky/he-piantor-42 repository on GitHub; these links point at the commit this page was built from.

He piantor-42: common questions

What microcontroller does the He piantor-42 use?

The He piantor-42 is built around the RP2040, from the RP2040/RP2350 family.

How big is the He piantor-42 PCB?

The He piantor-42 measures 20 × 16 mm, has 2 copper layers and is 1.2 mm thick.

How many components are on the He piantor-42?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the He piantor-42 design files?

From the ihsinoky/he-piantor-42 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the He piantor-42 design in my own project?

Yes, under the terms of its MIT license, which ihsinoky chose for the repository.

Can I test firmware for the He piantor-42 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.