1,127 open source boards using the RP2040
Real designs built with the RP2040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9kRP2040/RP2350
Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3kRP2040/RP2350
Hid remapper
jfedor2
100 × 100 mm124 parts2LMIT1.7kRP2040/RP2350
Picodvi
Wren6991
50 × 30 mm51 parts4LBSD-3-Clause1.5kRP2040/RP2350
Starfish
theacodes
100 × 100 mm220 parts4LMIT1.1kRP2040/RP2350
OpenDeck r3.1.2
shanteacontrols
181 × 97 mm258 parts2LApache-2.0956RP2040/RP2350
PicoGUS chipdown with edge rails
polpo
112.9 × 96.7 mm96 parts4LGPL-2.0800RP2040/RP2350
Easyduino RP2040
Hanqaqa
21 × 51 mm44 parts4LCERN-OHL-P-2.0754RP2040/RP2350
Usb sniffer lite
ataradov
43.4 × 18.8 mm38 parts2LBSD-3-Clause701RP2040/RP2350
Dspico hardware
LNH-team
27.2 × 32 mm44 parts4LCC-BY-SA-4.0599RP2040/RP2350
Gbinterceptor
Staacks
130.4 × 76.6 mm48 parts2LNo license541RP2040/RP2350
Riscboy
Wren6991
70.3 × 102.1 mm106 parts2LNo license511RP2040/RP2350
SPINC
CoretechR
70 × 72 mm91 parts4LGPL-3.0463RP2040/RP2350
Dual CPU Base Board
Twisted-Fields
94.4 × 72.8 mm247 parts4LCustom license419RP2040/RP2350
DIY-Gaming-Mouse
wareya
49.8 × 61.7 mm53 parts2LNo license401RP2040/RP2350
Peacock
george-norton
172 × 152.9 mm74 parts2LCERN-OHL-S-2.0307RP2040/RP2350
Key ripper
bschwind
285.8 × 116.7 mm211 parts2LApache-2.0288RP2040/RP2350
RP2040-designguide
calliah333
45.2 × 93.4 mm31 parts2LMIT271RP2040/RP2350
Vaio re
CRImier
75 × 65 mm274 parts4LGPL-3.0254RP2040/RP2350
Hunter Cat NFC
ElectronicCats
80.7 × 33.5 mm79 parts2LGPL-3.0233RP2040/RP2350
DECstation2040
rscott2049
52 × 90 mm56 parts2LBSD-3-Clause213RP2040/RP2350
PS2 AIO Mainboard
tschicki
121 × 83 mm568 parts6LMIT202RP2040/RP2350
PocketPD HW
CentyLab
50 × 50 mm81 parts2LCC-BY-SA-4.0196RP2040/RP2350
Sea picro
joshajohnson
17.8 × 33 mm47 parts4LCERN-OHL-S-2.0195RP2040/RP2350
Faultycat
ElectronicCats
51.2 × 124.2 mm94 parts2LBSD-3-Clause183RP2040/RP2350
0xB2
plut0nium
17.8 × 33 mm36 parts2LCERN-OHL-S-2.0174RP2040/RP2350
ErgoSNM right
siderakb
115.6 × 106.7 mm101 parts2LCERN-OHL-P-2.0170RP2040/RP2350
Rusty probe
probe-rs
40 × 14 mm85 parts4LNo license170RP2040/RP2350
Blaustahl
machdyne
30 × 16 mm38 parts2LCustom license132RP2040/RP2350
RP2040-Decoder
gab-k
25 × 20 mm47 parts4LCERN-OHL-P-2.0128RP2040/RP2350
BusPirate-5-rev10
DangerousPrototypes
60.5 × 60 mm210 parts4LMIT124RP2040/RP2350
Cornelius
foostan
271.3 × 120 mm124 parts2LCC-BY-NC-4.0121RP2040/RP2350
Fosdem dual capture
FOSDEM
87.9 × 95.8 mm211 parts4LNo license114RP2040/RP2350
Starfish
wntrblm
100 × 100 mm220 parts4LCC-BY-NC-4.0111RP2040/RP2350
SST60HS
dededecline
284.7 × 94.2 mm160 parts2LGPL-3.0107
How designs wire the RP2040
Read from the KiCad layouts of 800 open source designs, one per repository: what each pin of the RP2040 connects to, and the resistors, capacitors and other passives placed on it.
- The IOVDD pins have a decoupling capacitor on 728 of 800 designs, most often 100 nF (then 1 µF).
- The XIN pin has a crystal on 720 of 782 designs, most often 12 MHz (then 16 MHz).
- The USB_DM pin has a series resistor on 712 of 768 designs, most often 27 Ω (then 27.4 Ω).
- The USB_DP pin has a series resistor on 710 of 768 designs, most often 27 Ω (then 27.4 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IOVDDpin 1, 10, 22, 33, 42, 49 | Connected to: 3.3V 95% |
|
| TESTENpin 19 | Connected to: GND 92% | — |
| XINpin 20 | Connected to: Signal 98% |
|
| XOUTpin 21 | Connected to: Signal 95% |
|
| DVDDpin 23, 50 | Connected to: 1.1V 88% |
|
| RUNpin 26 | Connected to: A connector 34% |
|
| ADC_AVDDpin 43 | Connected to: 3.3V 90% |
|
| VREG_INpin 44 | Connected to: 3.3V 96% |
|
| VREG_VOUTpin 45 | Connected to: 1.1V 88% |
|
| USB_DMpin 46 | Connected to: Signal 97% |
|
| USB_DPpin 47 | Connected to: Signal 97% |
|
| USB_VDDpin 48 | Connected to: 3.3V 96% |
|
| QSPI_SSpin 56 | Connected to: W25Q128JVS 38% |
|
| GNDpin 57 | Connected to: GND 98% | — |
37 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Corne cherry by foostan, Main by google, Pro V2 by kata0510 and Hid remapper by jfedor2.
The RP2040 in open source designs
The gallery holds 1127 open source boards using the RP2040 from 822 GitHub repositories; a typical one measures about 70.6 × 63.8 mm and carries around 69 components.
66% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Corne chocolate by foostan.
Parts used alongside the RP2040
Microcontrollers on boards using the RP2040
What boards using the RP2040 are built for
RP2040: common questions
Where can I find a RP2040 reference design?
Each of the 1127 boards on this page is a real design using the RP2040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the RP2040 IOVDD pin?
The IOVDD pins have a decoupling capacitor on 728 of 800 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 800 open source designs using the RP2040.
How is the RP2040 XIN pin connected?
The XIN pin has a crystal on 720 of 782 designs, most often 12 MHz (then 16 MHz). Counted from the KiCad layouts of 800 open source designs using the RP2040.
What resistor goes on the RP2040 USB_DM pin?
The USB_DM pin has a series resistor on 712 of 768 designs, most often 27 Ω (then 27.4 Ω). Counted from the KiCad layouts of 800 open source designs using the RP2040.
What parts are used alongside the RP2040?
The W25Q128JVS, USBLC6-2SC6, MCP1700x-330xxTT, NCP1117-3.3_SOT223 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the RP2040 use?
Most are built on RP2040/RP2350 (1123), ESP32 (2), NXP (1) and Nordic nRF (1).
How big is a typical board using the RP2040?
The median is 70.6 × 63.8 mm, and 66% are two-layer designs.
What is the most popular open source board using the RP2040?
By GitHub stars, Corne chocolate by foostan, with 7,725 stars.
Can I simulate one of these boards using the RP2040 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.