Stm32-klima messgeraet
ijafarov7·stm32-klima-messgeraet·hardware/kicad/STM32_Messgeraet.kicad_pcb
About the Stm32-klima messgeraet PCB
Stm32-klima messgeraet is an open source STM32 PCB design by ijafarov7, published on GitHub. It is a 2-layer board measuring 38 × 35 mm, with 19 components from 11 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 capacitors, 6 resistors, 4 connectors, 2 ICs and 1 switch.
It belongs with the displays & leds, sensors and dev boards & breakouts designs in this gallery.
From the project
Temperatur- und Feuchte-Messgerät mit STM32F103, SHT40 und OLED (C/HAL, KiCad)
Ein kleines Messgerät für Temperatur und Luftfeuchtigkeit auf Basis eines STM32F103 („Blue Pill“), eines Sensirion SHT40 und eines 0,96" OLED-Displays. Die Messwerte werden jede Sekunde über I²C ausgelesen, in °C und % umgerechnet und auf dem Display angezeigt.
A small temperature and humidity meter: STM32F103 (Blue Pill) reads a Sensirion SHT40 over I²C and shows the values on an SSD1306 OLED. Firmware in C with the STM32 HAL; a custom KiCad PCB is in progress.

Main components on the Stm32-klima messgeraet
Stm32-klima messgeraet bill of materials (BOM)
19 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J4 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 2 | 10µ | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 4 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 4.6k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 5.1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
Stm32-klima messgeraet design files
The KiCad project lives in the ijafarov7/stm32-klima-messgeraet repository on GitHub; these links point at the commit this page was built from.
Stm32-klima messgeraet: common questions
What microcontroller does the Stm32-klima messgeraet use?
The Stm32-klima messgeraet is built around the STM32F103C8Tx, from the STM32 family.
How big is the Stm32-klima messgeraet PCB?
The Stm32-klima messgeraet measures 38 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32-klima messgeraet?
19 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32-klima messgeraet design files?
From the ijafarov7/stm32-klima-messgeraet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32-klima messgeraet design in my own project?
The repository has no license, so all rights stay with ijafarov7. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32-klima messgeraet without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k