ModuleCore
About the ModuleCore PCB
ModuleCore is an open source PCB design by ikechangexentrick, published on GitHub under the MIT license. It is a 2-layer board measuring 35.6 × 99.1 mm, with 41 components from 19 distinct parts.
Other key parts include the ProMicro, LM78L05_TO92 and TL074. By type, the board carries 15 resistors, 9 diodes, 9 capacitors, 4 ICs, 3 connectors and 1 switch.
From the project
Sequencer producing Euclidean rhythm
Main components on the ModuleCore
ModuleCore bill of materials (BOM)
41 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | Pro_Micro_Top_side_Up | U1 |
| 1 | LM78L05_TO92 | TO-92_Inline_Wide | U2 |
| 2 | TL074 | DIP-14_W7.62mm | U3, U4 |
| 1 | power_bus | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | Conn_Left | PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | Conn_Right | PinHeader_1x08_P2.54mm_Vertical | J11 |
| 1 | reset | SW_PUSH_6mm | SW1 |
| 2 | D_Schottky | D_DO-34_SOD68_P2.54mm_Vertical_AnodeUp | D3, D4 |
| 6 | 1N4148 | D_DO-34_SOD68_P2.54mm_Vertical_AnodeUp | D5, D6, D7, D8, D9, D10 |
| 1 | 1N4148 | D_DO-34_SOD68_P7.62mm_Horizontal | D13 |
| 2 | 100u | CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 4 | 0.1u | C_Axial_L4.8mm_D2.0mm_P2.54mm_Horizontal | C5, C6, C10, C11 |
| 3 | 100p | C_Axial_L4.8mm_D2.0mm_P2.54mm_Horizontal | C7, C8, C9 |
| 6 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R7, R12, R13, R14, R15 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R17 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R18, R21 |
| 3 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R19, R22, R23 |
| 1 | 820 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R24 |
| 1 | 1.5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R25 |
ModuleCore design files
The KiCad project lives in the ikechangexentrick/euclidean_sequencer repository on GitHub; these links point at the commit this page was built from.
- Layouthw/ModuleCore.kicad_pcb
ModuleCore: common questions
How big is the ModuleCore PCB?
The ModuleCore measures 35.6 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ModuleCore?
41 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the ModuleCore design files?
From the ikechangexentrick/euclidean_sequencer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ModuleCore design in my own project?
Yes, under the terms of its MIT license, which ikechangexentrick chose for the repository.
