9 open source boards using the LM78L05_TO92

Real designs built with the LM78L05_TO92, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the LM78L05_TO92

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LM78L05_TO92 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 100 µF).
VOpin 1Connected to: 5V 88%
  • Decoupling capacitor on 38% · 100 nF (2), 100 µF (1)
GNDpin 2Connected to: GND 100%
VIpin 3Connected to: 9V 63% · a signal 38%
  • Decoupling capacitor on 50% · 100 nF (1), 100 µF (1), 330 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include No mcu distance meter by AlexIII, Ouroboros by echamman, ModuleCore by ikechangexentrick and LineFollower V2.0 by Tonikiller10000.

The LM78L05_TO92 in open source designs

The gallery holds 9 open source boards using the LM78L05_TO92 from 9 GitHub repositories; a typical one measures about 65.2 × 48.5 mm and carries around 41 components.

88% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is No mcu distance meter by AlexIII.

Parts used alongside the LM78L05_TO92

Microcontrollers on boards using the LM78L05_TO92

What boards using the LM78L05_TO92 are built for

LM78L05_TO92: common questions

Where can I find a LM78L05_TO92 reference design?

Each of the 9 boards on this page is a real design using the LM78L05_TO92. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LM78L05_TO92 VI pin?

The VI pin has a decoupling capacitor on 4 of 8 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 8 open source designs using the LM78L05_TO92.

Which microcontrollers do boards using the LM78L05_TO92 use?

Most are built on AVR/Arduino (1), ESP32 (1), PIC (1) and STM32 (1).

How big is a typical board using the LM78L05_TO92?

The median is 65.2 × 48.5 mm, and 88% are two-layer designs.

What is the most popular open source board using the LM78L05_TO92?

By GitHub stars, No mcu distance meter by AlexIII, with 4 stars.

Can I simulate one of these boards using the LM78L05_TO92 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part