LM317-Adjustable-PowerSupply

IKGB105·LM317-Adjustable-PowerSupply·pcb/ADJUSTABLE_PS_LM317/ADJUSTABLE_PS_LM317.kicad_pcb

LM317-Adjustable-PowerSupply PCB layout, top view — open source board by IKGB105

About the LM317-Adjustable-PowerSupply PCB

LM317-Adjustable-PowerSupply is an open source PCB design by IKGB105, published on GitHub under the MIT license. It is a 2-layer board measuring 62 × 28 mm, with 11 components from 9 distinct parts.

Other key parts include the LM317_TO-220. By type, the board carries 3 capacitors, 2 diodes, 1 IC and 1 resistor.

It belongs with the power & battery designs in this gallery.

From the project

Adjustable linear power supply based on the LM317 (12V→1.25–9.06V) — LTspice simulation, KiCad PCB, and COMSOL thermal FEM validation, documented as an honest engineering logbook.

Adjustable power supply based on the LM317 (simulated as LT317A in LTspice), documented as an honest engineering logbook: every result is marked as calculated, simulated, or pending — no invented placeholders.

- Input: 12 V DC - Real adjustable output: 1.25 V to ≈ 9.06 V

Design target: I_max = 500 mA (a bench power supply, not derived from a specific external application).

LM317-Adjustable-PowerSupply, from the project README
From the project README

Main components on the LM317-Adjustable-PowerSupply

LM317-Adjustable-PowerSupply bill of materials (BOM)

11 components, 9 distinct parts.

QtyPartRefs
1
LM317_TO-220
U1
2
GND
12Vin1, V_OUT1
1
Heatsink
HS1
1
1.5k
RV1
2
1N4002
D1, D2
1
0.1 uF
C1
1
10 uF
C2
1
1 uF
C3
1
240
R1

LM317-Adjustable-PowerSupply design files

The KiCad project lives in the IKGB105/LM317-Adjustable-PowerSupply repository on GitHub; these links point at the commit this page was built from.

LM317-Adjustable-PowerSupply: common questions

How big is the LM317-Adjustable-PowerSupply PCB?

The LM317-Adjustable-PowerSupply measures 62 × 28 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LM317-Adjustable-PowerSupply?

11 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the LM317-Adjustable-PowerSupply design files?

From the IKGB105/LM317-Adjustable-PowerSupply repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LM317-Adjustable-PowerSupply design in my own project?

Yes, under the terms of its MIT license, which IKGB105 chose for the repository.

Similar boards