NfcHardware
About the NfcHardware PCB
NfcHardware is an open source Raspberry Pi PCB design by InfectedLan, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 47 × 47 mm, with 21 components from 13 distinct parts.
Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. Other key parts include the TLC5917. By type, the board carries 11 connectors, 9 resistors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 2 earlier revisions of it.
From the project
Repository containing the open source hardware for the NFC platform
Main components on the NfcHardware
NfcHardware bill of materials (BOM)
21 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLC5917 | DIP-16_W10.16mm | U1 |
| 1 | Raspberry_Pi_2_3 | Pin_Header_Straight_2x20_Pitch2.54mm | J1 |
| 1 | Serial | Socket_Strip_Straight_1x02_Pitch2.54mm | J2 |
| 1 | I2C | Socket_Strip_Straight_1x02_Pitch2.54mm | J3 |
| 1 | LED1 | Socket_Strip_Straight_1x02_Pitch2.54mm | J4 |
| 1 | LED2 | Socket_Strip_Straight_1x02_Pitch2.54mm | J5 |
| 1 | LED3 | Socket_Strip_Straight_1x02_Pitch2.54mm | J6 |
| 1 | LED4 | Socket_Strip_Straight_1x02_Pitch2.54mm | J7 |
| 1 | LED5 | Socket_Strip_Straight_1x02_Pitch2.54mm | J8 |
| 1 | LED6 | Socket_Strip_Straight_1x02_Pitch2.54mm | J9 |
| 1 | LED7 | Socket_Strip_Straight_1x02_Pitch2.54mm | J10 |
| 1 | LED8 | Socket_Strip_Straight_1x02_Pitch2.54mm | J11 |
| 9 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
NfcHardware design files
The KiCad project lives in the InfectedLan/NfcHardware repository on GitHub; these links point at the commit this page was built from.
NfcHardware: common questions
What microcontroller does the NfcHardware use?
The NfcHardware is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.
How big is the NfcHardware PCB?
The NfcHardware measures 47 × 47 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NfcHardware?
21 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the NfcHardware design files?
From the InfectedLan/NfcHardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the NfcHardware design in my own project?
Yes, under the terms of its GPL-3.0 license, which InfectedLan chose for the repository.
Can I test firmware for the NfcHardware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Earlier revisions in the repo: led-breakout_v1, led-breakout
Similar boards
Raspberry PiOpen source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7k
Raspberry PiIot
dotnet
56 × 65 mm24 parts2LMIT2.4k
Raspberry PiSPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3k
Raspberry PiCM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0k
Raspberry PiHaxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license672
Raspberry PiPhased
Neumi
75 × 100 mm71 parts2LNo license507