HardLabs

ZACI - Pellet Dispenser Controller

iNkawuVervetProject·VerTIGo·devices/pellet-dispenser/ecad/pellet_dispenser.kicad_pcb

ZACI - Pellet Dispenser Controller PCB layout, top view — open source RP2040/RP2350 board by iNkawuVervetProject

About the ZACI - Pellet Dispenser Controller PCB

ZACI - Pellet Dispenser Controller is an open source RP2040/RP2350 PCB design by iNkawuVervetProject, published on GitHub. It is a 2-layer board measuring 54 × 53 mm, with 23 components from 14 distinct parts.

Its main chip is the SC0915, from the RP2040/RP2350 family. Other key parts include the DRV8848PWPR. By type, the board carries 9 connectors, 4 transistors, 3 capacitors, 2 ICs, 2 test points and 2 resistors.

From the project

Portable Zoo based Animal-Computer Interactive setup

Main components on the ZACI - Pellet Dispenser Controller

SC0915DRV8848PWPR

ZACI - Pellet Dispenser Controller bill of materials (BOM)

23 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SC0915
Pico
Raspberry Pi Foundation
U1
1
DRV8848PWPR
DRV8848
Texas Instruments
U2
1
DMG2305UX
Diodes Incorporated
Q1
3
RE1C002UN
Rohm Semiconductor
Q2, Q3, Q4
5
SM03B-SRSS-TB
JST SH
JST
J1, J5, J6, J7, J8
1
SM04B-SRSS-TB
JST SH
JST
J2
3
S2B-PH-K
JST PH
JST
J3, J4, J10
1
434133025816
Test
Würth Elektronik
SW1
2
RCUCTE
KOA Speer Electronics, Inc.
TP1, TP2
1
CL10B104KB8NNWC
100n
Samsung Electro-Mechanics
C1
1
CL21A106KAYNNNG
10u
Samsung Electro-Mechanics
C2
1
CL21A225KAFNNNG
2.2u
Samsung Electro-Mechanics
C3
1
CSRN2512FKR250
0.25
Stackpole Electronics Inc
R2
1
RLC73PD3AR316FTDG
0.316
TE Connectivity Passive Product
R3

ZACI - Pellet Dispenser Controller design files

The KiCad project lives in the iNkawuVervetProject/VerTIGo repository on GitHub; these links point at the commit this page was built from.

ZACI - Pellet Dispenser Controller: common questions

What microcontroller does the ZACI - Pellet Dispenser Controller use?

The ZACI - Pellet Dispenser Controller is built around the SC0915, from the RP2040/RP2350 family.

How big is the ZACI - Pellet Dispenser Controller PCB?

The ZACI - Pellet Dispenser Controller measures 54 × 53 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ZACI - Pellet Dispenser Controller?

23 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ZACI - Pellet Dispenser Controller design files?

From the iNkawuVervetProject/VerTIGo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ZACI - Pellet Dispenser Controller design in my own project?

The repository has no license, so all rights stay with iNkawuVervetProject. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ZACI - Pellet Dispenser Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in VerTIGo

Similar boards