HardLabs

SEIA-Hardware

InLabs-SAL·SEIA-Hardware

This repository ships a schematic but no board layout.

About the SEIA-Hardware PCB

SEIA-Hardware is an open source NXP PCB design by InLabs-SAL, published on GitHub. It is a 2-layer board, with 22 components from 16 distinct parts.

Its main chip is the MIMXRT1062DVL6A, from the NXP family. Other key parts include the BMF055, BMP390, DP83825IRMQR and MKL02Z32VFG4. By type, the board carries 8 capacitors, 5 ICs, 3 resistors, 1 transistor, 1 crystal and 1 connector.

It belongs with the rf & radio designs in this gallery.

From the project

This is the KICAD PCB Sch for the SEIA Thurst Vector Rocket.

Main components on the SEIA-Hardware

MIMXRT1062DVL6ABMF055BMP390DP83825IRMQRMKL02Z32VFG4

SEIA-Hardware bill of materials (BOM)

22 components, 16 distinct parts.

QtyPartRefs
1
MIMXRT1062DVL6A
IC1
1
BMF055
IC2
1
BMP390
IC3
1
DP83825IRMQR
IC4
1
MKL02Z32VFG4
IC6
1
DMG2305UX
Q1
1
XRCGB32M768F2N10R0
Y1
1
ST1W008S4TR2000
J1
1
~
B1
1
PKMCS0909E4000-R1
LS1
1
TLV70433DBVR
PS1
2
CL21A475KAQNNNE
C1, C2
2
C0603C220J5GACTU
C3, C6
4
CL05B104KP5NNNC
C4, C5, C7, C8
2
ERJ-2GEJ472X
R1, R2
1
EXB28V103JX
RN1

SEIA-Hardware design files

The KiCad project lives in the InLabs-SAL/SEIA-Hardware repository on GitHub; these links point at the commit this page was built from.

SEIA-Hardware: common questions

What microcontroller does the SEIA-Hardware use?

The SEIA-Hardware is built around the MIMXRT1062DVL6A, from the NXP family.

How big is the SEIA-Hardware PCB?

The SEIA-Hardware has 2 copper layers and is 1.6 mm thick.

How many components are on the SEIA-Hardware?

22 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the SEIA-Hardware design files?

From the InLabs-SAL/SEIA-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SEIA-Hardware design in my own project?

The repository has no license, so all rights stay with InLabs-SAL. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SEIA-Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

Similar boards