39 open source boards using the BMP390

Real designs built with the BMP390, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

39 boardsClear filters|Most starred

How designs wire the BMP390

Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the BMP390 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 28 of 30 designs, most often 100 nF (then 1 µF).
  • The VDD pin has a decoupling capacitor on 28 of 28 designs, most often 100 nF (then 2.2 µF).
  • The SCK pin has a pull-up to 3.3V on 21 of 30 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • The SDI pin has a pull-up to 3.3V on 20 of 30 designs, most often 4.7 kΩ (then 2.2 kΩ).
VDDIOpin 1Connected to: 3.3V 93%
  • Decoupling capacitor on 93% · 100 nF (54), 1 µF (3), 2.2 µF (3)
SCKpin 2Connected to: The microcontroller 77%, a connector 30%
  • Pull-up to 3.3V on 70% · 4.7 kΩ (13), 2.2 kΩ (3), 10 kΩ (2)
VSSpin 3, 8, 9Connected to: GND 97%
SDIpin 4Connected to: The microcontroller 77%, a connector 33%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (13), 2.2 kΩ (3), 2.7 kΩ (2)
VDDpin 10Connected to: 3.3V 89%
  • Decoupling capacitor on 100% · 100 nF (57), 2.2 µF (5), 1 µF (4)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Shirley-FC-Dev-Board by Bare-Metal-Foundry, Flight-Computer by SunDevilRocketry, PocketLab-Card by Jebroa774 and CompactPi by loganrf.

The BMP390 in open source designs

The gallery holds 39 open source boards using the BMP390 from 34 GitHub repositories; a typical one measures about 58.4 × 54 mm and carries around 74 components.

81% use four copper layers or more, and 41% carry an open source license.

The most starred is Shirley-FC-Dev-Board by Bare-Metal-Foundry.

BMP390: common questions

Where can I find a BMP390 reference design?

Each of the 39 boards on this page is a real design using the BMP390. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BMP390 VDDIO pin?

The VDDIO pin has a decoupling capacitor on 28 of 30 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 30 open source designs using the BMP390.

What decoupling capacitors do designs use on the BMP390 VDD pin?

The VDD pin has a decoupling capacitor on 28 of 28 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 30 open source designs using the BMP390.

What pull-up resistor is used on the BMP390 SCK pin?

The SCK pin has a pull-up to 3.3V on 21 of 30 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 30 open source designs using the BMP390.

What parts are used alongside the BMP390?

The ICM-42688-P, MMC5983MA, USBLC6-2SC6, AP2112K-3.3TRG1 and BMI088 appear in the most repositories here.

Which microcontrollers do boards using the BMP390 use?

Most are built on STM32 (13), ESP32 (10), NXP (4) and RP2040/RP2350 (4).

How big is a typical board using the BMP390?

The median is 58.4 × 54 mm, and 19% are two-layer designs.

What is the most popular open source board using the BMP390?

By GitHub stars, Shirley-FC-Dev-Board by Bare-Metal-Foundry, with 31 stars.

Can I simulate one of these boards using the BMP390 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part