7 open source boards using the MKL02Z32VFG4
Real designs built with the MKL02Z32VFG4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Kbox hardware
sarfata
100 × 54 mm102 parts2LNo license19NXP
Horizon
Horizon-Avionics
68.8 × 90.3 mm168 parts4LNo license17NXP
MicroMod 3.2
luni64
22 × 22 mm16 parts2LMIT17NXP
Custom-Teensy-4.1-PCB-Design
Wierdwizard2587
87.6 × 53.9 mm85 parts6LNo license8- schematic only · 22 partsNXP
SEIA-Hardware
InLabs-SAL
22 parts2LNo license1 NXP
MicroMod-Teensy-Lockable
cpeniche
22 × 22 mm72 parts4LNo license0NXP
TouchDrum
JoelEB
100 × 100 mm140 parts4LNo license0
How designs wire the MKL02Z32VFG4
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MKL02Z32VFG4 connects to, and the resistors, capacitors and other passives placed on it.
- The PTA0/IRQ_0 pin is left unconnected on 5 of 6 designs.
- The VDD/VREFH pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 220 nF).
- The PTB3/IRQ_10 pin is left unconnected on 4 of 6 designs (a signal on 2).
- The PTB4/IRQ_11 pin is left unconnected on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD/VREFHpin 1 | Connected to: 3.3V 83% · not connected 17% |
|
| VSS/VREFLpin 2 | Connected to: GND 83% · not connected 17% | — |
| PTA3pin 3 | Connected to: The microcontroller 33% · not connected 33% · 3.3V 17% |
|
| PTA4pin 4 | Connected to: The microcontroller 67%, a connector 33% · 3.3V 17% |
|
| PTB3/IRQ_10pin 11 | Connected to: Not connected 67% · a signal 33% |
|
| PTB4/IRQ_11pin 12 | Connected to: Not connected 67% · a signal 33% | — |
| PTB5/IRQ_12pin 13 | Connected to: The microcontroller 67%, a connector 50% · not connected 17% |
|
| PTA0/IRQ_0pin 14 | Connected to: Not connected 83% · a signal 17% | — |
| PTA2pin 16 | Connected to: Not connected 67% · a signal 33% | — |
| EPADpin 17 | Connected to: GND 80% · a signal 20% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kbox hardware by sarfata, Horizon by Horizon-Avionics, MicroMod 3.2 by luni64 and Custom-Teensy-4.1-PCB-Design by Wierdwizard2587.
The MKL02Z32VFG4 in open source designs
The gallery holds 7 open source boards using the MKL02Z32VFG4 from 7 GitHub repositories; a typical one measures about 78.2 × 53.9 mm and carries around 85 components.
57% use four copper layers or more, and 14% carry an open source license.
The most starred is Kbox hardware by sarfata.
Parts used alongside the MKL02Z32VFG4
Microcontrollers on boards using the MKL02Z32VFG4
What boards using the MKL02Z32VFG4 are built for
MKL02Z32VFG4: common questions
Where can I find a MKL02Z32VFG4 reference design?
Each of the 7 boards on this page is a real design using the MKL02Z32VFG4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MKL02Z32VFG4 PTA0/IRQ_0 pin connected?
The PTA0/IRQ_0 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the MKL02Z32VFG4.
What decoupling capacitors do designs use on the MKL02Z32VFG4 VDD/VREFH pin?
The VDD/VREFH pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 6 open source designs using the MKL02Z32VFG4.
How is the MKL02Z32VFG4 PTB3/IRQ_10 pin connected?
The PTB3/IRQ_10 pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the MKL02Z32VFG4.
Which microcontrollers do boards using the MKL02Z32VFG4 use?
Most are built on NXP (7).
How big is a typical board using the MKL02Z32VFG4?
The median is 78.2 × 53.9 mm, and 43% are two-layer designs.
What is the most popular open source board using the MKL02Z32VFG4?
By GitHub stars, Kbox hardware by sarfata, with 19 stars.
Can I simulate one of these boards using the MKL02Z32VFG4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.