Ct module
About the Ct module
Ct module is an open source PCB design by inoa-io, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 86 × 31 mm, with 38 components from 16 distinct parts.
Other key parts include the BA033CC0FP-E2, ADS1115IDGS and MAX3486. By type, the board carries 13 resistors, 8 capacitors, 7 diodes, 6 connectors, 3 ICs and 1 fuse.
It belongs with the rf & radio designs in this gallery.
From the project
Satellite Hardware Project and Documentation
The Inoa Satellite is a lightweight and secure gateway for your fuse box or industrial environment.
Please see our Project Pages for details.
There is a huge amount of IoT gateways out there, but none of these fulfill completely all of our design goals:
Usage in a rough industrial environment Hardware driven security (HSM) Inexpensive hardware to be able to finance a huge fleet of devices Low energy consumption Fuse box casing (DIN rail) Small (2 FE / 36 mm) to allow mounting in existing fuse boxes Extendable design to be future proof Modular design to adapt hardware to use cases and keep…
Main components on the Ct module
Ct module bill of materials (BOM)
38 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BA033CC0FP-E2 | TO-252-3_TabPin2 | U1 |
| 1 | ADS1115IDGS | VSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | MAX3486 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | North | PHOENIX_1935200 | J1 |
| 1 | West | PinHeader_1x14_P2.54mm_Vertical | J3 |
| 1 | East | PinHeader_1x14_P2.54mm_Vertical | J4 |
| 3 | SJ1-3533NG | CUI_SJ1-3533NG | J5, J6, J7 |
| 1 | 25V/1A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 25V | D_SOD-123 | D1 |
| 1 | 1N5819 | D_SOD-323_HandSoldering | D2 |
| 5 | 3V3 | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D5, D6, D7, D10 |
| 4 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C4, C6 |
| 3 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5, C9 |
| 1 | 0u1 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 11 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R5, R6, R7, R8, R9, R10 +3 |
| 2 | 220R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
Ct module design files
The KiCad project lives in the inoa-io/satellite repository on GitHub; these links point at the commit this page was built from.
Ct module: common questions
How big is the Ct module?
The Ct module measures 86 × 31 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ct module?
38 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ct module design files?
From the inoa-io/satellite repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ct module design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which inoa-io chose for the repository.
More boards in satellite
Development board
153 × 77 mm97 parts2LCERN-OHL-P-2.02
M bus module
86 × 31 mm56 parts2LCERN-OHL-P-2.02
Ethernet extension
56 × 30.4 mm42 parts2LCERN-OHL-P-2.02
Metering module
86 × 31 mm35 parts2LCERN-OHL-P-2.02
LoRa LMN Metering Module
86 × 31 mm34 parts2LCERN-OHL-P-2.02
Debug module
40.6 × 30.4 mm34 parts2LCERN-OHL-P-2.02
Tenement module
86 × 31 mm23 parts2LCERN-OHL-P-2.02
Mieterstrom module
86 × 31 mm23 parts2LCERN-OHL-P-2.02
Nbiot extension
56 × 30.4 mm18 parts2LCERN-OHL-P-2.02
ESP32Satellite SoM
56 × 30.4 mm17 parts2LCERN-OHL-P-2.02
Panel module
40.6 × 30.4 mm13 parts2LCERN-OHL-P-2.02
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372