HardLabs

Phantom-MX

invicta952-dotcom·Phantom-MX·PCB/keyborad.kicad_pcb

Phantom-MX PCB layout, top view — open source RP2040/RP2350 board by invicta952-dotcom

About the Phantom-MX PCB

Phantom-MX is an open source RP2040/RP2350 PCB design by invicta952-dotcom, published on GitHub. It is a 2-layer board measuring 360.9 × 160.7 mm, with 177 components from 11 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 88 switches, 88 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

80% custom mechincal keyboard with mx cherry swicthes and roatary encoder

Phantom-MX, from the project README
From the project README

Main components on the Phantom-MX

RaspberryPi_Pico

Phantom-MX bill of materials (BOM)

177 components, 11 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
72
SW_Push_45deg
SW1, SW2, SW7, SW8, SW9, SW10, SW11, SW12 +64
2
SW_Push_45deg
SW3, SW80
1
SW_Push_45deg
SW4
2
SW_Push_45deg
SW5, SW71
7
SW_Push_45deg
SW6, SW13, SW22, SW78, SW79, SW86, SW89
1
SW_Push_45deg
SW24
1
SW_Push_45deg
SW70
1
SW_Push_45deg
SW72
1
RotaryEncoder_Switch
SW90
88
D
D1, D2, D3, D4, D5, D6, D7, D8 +80

Phantom-MX design files

The KiCad project lives in the invicta952-dotcom/Phantom-MX repository on GitHub; these links point at the commit this page was built from.

Phantom-MX: common questions

What microcontroller does the Phantom-MX use?

The Phantom-MX is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Phantom-MX PCB?

The Phantom-MX measures 360.9 × 160.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Phantom-MX?

177 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Phantom-MX design files?

From the invicta952-dotcom/Phantom-MX repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Phantom-MX design in my own project?

The repository has no license, so all rights stay with invicta952-dotcom. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Phantom-MX without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards