Esp32-drone platform
IoT-App-Development-Company·esp32-drone-platform·PCB/KiCad/PCB-Drone.kicad_pcb
About the Esp32-drone platform PCB
Esp32-drone platform is an open source PCB design by IoT-App-Development-Company, published on GitHub. It is a 2-layer board measuring 45 × 45.1 mm, with 0 components from 0 distinct parts.
It belongs with the robotics & motion, iot & wireless and sensors designs in this gallery.
From the project
Open-source ESP32-based drone PCB featuring a custom flight controller, power management, IMU support, ESC interfaces, and Wi-Fi control. Compatible with the ESP-Drone firmware and Android app, making it ideal for DIY quadcopters, embedded systems learning, and UAV development.
This repository contains a custom-designed ESP32 Drone PCB developed for lightweight quadcopters. The board integrates the essential interfaces required for flight control, including motor outputs, IMU connectivity, power management, programming, and expansion peripherals.
Designed around the ESP32-WROOM module, the hardware is compatible with the ESP-Drone open-source firmware and Android application, providing a complete platform for learning, experimentation, and custom drone development.
Esp32-drone platform design files
The KiCad project lives in the IoT-App-Development-Company/esp32-drone-platform repository on GitHub; these links point at the commit this page was built from.
Esp32-drone platform: common questions
How big is the Esp32-drone platform PCB?
The Esp32-drone platform measures 45 × 45.1 mm and has 2 copper layers.
How many components are on the Esp32-drone platform?
0 components, from 0 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32-drone platform design files?
From the IoT-App-Development-Company/esp32-drone-platform repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32-drone platform design in my own project?
The repository has no license, so all rights stay with IoT-App-Development-Company. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k