IFS09-TE-TeleReceiver

isc-fs·IFS09-TE-TeleReceiver·IFS09-TeleReceiver/IFS09-TeleReceiver.kicad_pcb

IFS09-TE-TeleReceiver PCB layout, top view — open source board by isc-fs

About the IFS09-TE-TeleReceiver PCB

IFS09-TE-TeleReceiver is an open source PCB design by isc-fs, published on GitHub. It is a 2-layer board measuring 38.8 × 48.9 mm, with 11 components from 8 distinct parts.

Other key parts include the NRF24L01_Breakout and LM1117MP-3.3. By type, the board carries 5 capacitors, 2 ICs, 2 diodes and 2 resistors.

It belongs with the rf & radio designs in this gallery.

From the project

Official hardware design, KiCad schematics, PCB layout, and firmware for the IFS09 Telemetry Receiver board (ISC Formula Student 2026/27). Integrates an ATmega328P (Nano USB-C) with an nRF24L01+ PA+LNA transceiver, dedicated 3.3V LDO regulator, external SMA 2.4GHz antenna, and RTT_nano_26 firmware for trackside telemetry acquisition.

Hardware design, KiCad schematics, PCB layout, and embedded firmware for the Telemetry Receiver Board of the IFS09, developed for the ISC Formula Student Racing Team (Season 2026/2027).

1. Create a GitHub account if you don't have one yet. 2. Download and install GitHub Desktop (beginner) or Git CLI (advanced). - If this is your first time using GitHub Desktop, make sure to read the User Manual. - If this is your first time using Git, start with a tutorial: - Git Tutorial - Atlassian Git Tutorial - Keep a copy of GitHub's Git Cheat Sheet handy as a reference.

IFS09-TE-TeleReceiver, from the project README
From the project README

Main components on the IFS09-TE-TeleReceiver

IFS09-TE-TeleReceiver bill of materials (BOM)

11 components, 8 distinct parts.

QtyPartRefs
1
NRF24L01_Breakout
U1
1
LM1117MP-3.3
U2
2
LED
D1, D2
1
1uF
C1
1
10nF
C2
1
100nF
C3
2
10uF
C4, C5
2
2k
R1, R2

IFS09-TE-TeleReceiver design files

The KiCad project lives in the isc-fs/IFS09-TE-TeleReceiver repository on GitHub; these links point at the commit this page was built from.

IFS09-TE-TeleReceiver: common questions

How big is the IFS09-TE-TeleReceiver PCB?

The IFS09-TE-TeleReceiver measures 38.8 × 48.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IFS09-TE-TeleReceiver?

11 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the IFS09-TE-TeleReceiver design files?

From the isc-fs/IFS09-TE-TeleReceiver repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the IFS09-TE-TeleReceiver design in my own project?

The repository has no license, so all rights stay with isc-fs. Use it as a reference, and ask the author before reusing the design.

Similar boards