HardLabs

Macropad

ishan211·macropad·pcb/macropad/macropad.kicad_pcb

Macropad PCB layout, top view — open source RP2040/RP2350 board by ishan211

About the Macropad PCB

Macropad is an open source RP2040/RP2350 PCB design by ishan211, published on GitHub. It is a 2-layer board measuring 42.9 × 62.9 mm, with 7 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 4 switches, 2 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

This is a Macropad to make my coding/dev flow easier.

This is a Macropad to make my coding/dev flow easier.

I added keys to: - launch wsl - git commit - save files - comment out lines

Macropad, from the project README
From the project README

Main components on the Macropad

XIAO-RP2040-DIP

Macropad bill of materials (BOM)

7 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
4
SW_Push
SW1, SW2, SW3, SW4
2
SK6812MINI
D1, D2

Macropad design files

The KiCad project lives in the ishan211/macropad repository on GitHub; these links point at the commit this page was built from.

Macropad: common questions

What microcontroller does the Macropad use?

The Macropad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Macropad PCB?

The Macropad measures 42.9 × 62.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Macropad?

7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Macropad design files?

From the ishan211/macropad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Macropad design in my own project?

The repository has no license, so all rights stay with ishan211. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Macropad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in macropad

Similar boards