Usb sp

Ismael034·usbsp·hardware/usb_sp.kicad_pcb

Usb sp PCB layout, top view — open source RISC-V board by Ismael034

About the Usb sp PCB

Usb sp is an open source RISC-V PCB design by Ismael034, published on GitHub under the MIT license. It is a 4-layer board measuring 38.1 × 59.7 mm, with 48 components from 26 distinct parts.

Its main chip is the CH32V203C8U6, from the RISC-V family. Other key parts include the ZD24C02B-MAGMT, 32.768kHz, KH-TYPE-C-16P, SD101CWS and CH572D. By type, the board carries 14 capacitors, 10 ICs, 10 resistors, 2 crystals, 2 LEDs and 2 diodes.

From the project

Have you ever tried to plug a USB device into a computer that has USB restrictions enabled? It's frustrating, isn't it? You can't use your USB devices, and you have no way to bypass the restrictions. But what if I told you that you could spoof the USB identifiers so you bypass th

Have you ever tried to plug a USB device into a computer that has USB restrictions enabled? It's frustrating, isn't it? You can't use your USB devices, and you have no way to bypass the restrictions. But what if I told you that you could spoof the USB identifiers so you bypass these restrictions? That's where USBsp comes in.

USBsp is a USB device that can spoof the USB identifiers of any device you want. It is based on the CH32V203 and CH572D microcontrollers. With USBsp, you can easily bypass USB restrictions and use your USB devices without any issues.

Usb sp, from the project README
From the project README

Main components on the Usb sp

CH32V203C8U6ZD24C02B-MAGMT32.768kHzKH-TYPE-C-16PSD101CWSCH572DHX_JN1_27-2X5P_ZZ_H4_9SN74LVC1G32DBVR

Usb sp bill of materials (BOM)

48 components, 26 distinct parts.

QtyPartRefs
1
CH32V203C8U6
WCH(南京沁恒)
U1
1
ZD24C02B-MAGMT
Zetta(澜智)
U2
1
32.768kHz
JGHC(晶光华)
U3
1
KH-TYPE-C-16P
U4
1
SD101CWS
CJ(江苏长电/长晶)
U5
1
CH572D
U6
2
HX_JN1_27-2X5P_ZZ_H4_9
U7, U8
2
SN74LVC1G32DBVR
U9, U10
1
8MHz
YJX(雅晶鑫)
X1
1
XTM20032000DT00351001
X2
4
~
XUNPU(讯普)
BOOT_0, BOOT_1, RESET1, USER1
1
JK-SMD0805-020-30V
JK(金科)
F1
1
ME6211C33M5G-N
MICRONE(南京微盟)
LDO1
1
USB-A-A/M_Stick_plate_bent_legs_VinylPBT_With_a_column
USB1
1
10.0 QTJ6.3
SHOU HAN(首韩)
USB2
1
XL-1608UGC-04
XINGLIGHT(成兴光)
LED1
1
NCD0603R1
国星光电
PWR1
2
USBLC6-2P6
TECH PUBLIC(台舟)
D1, D2
3
10uF
HRE(芯声)
C1, C2, C13
6
15pF
FH(风华)
C3, C4, C10, C11, C12, C14
Show 6 more
QtyPartRefs
1
100nF
SAMSUNG(三星)
C5
3
100nF
HRE(芯声)
C6, C7, C8
1
4.7uF
SAMSUNG(三星)
C9
3
5.1kΩ
R1, R2, R3
5
10kΩ
YAGEO(国巨)
R4, R5, R6, R9, R10
2
1kΩ
UNI-ROYAL(厚声)
R7, R8

Usb sp design files

The KiCad project lives in the Ismael034/usbsp repository on GitHub; these links point at the commit this page was built from.

Usb sp: common questions

What microcontroller does the Usb sp use?

The Usb sp is built around the CH32V203C8U6, from the RISC-V family.

How big is the Usb sp PCB?

The Usb sp measures 38.1 × 59.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Usb sp?

48 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Usb sp design files?

From the Ismael034/usbsp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Usb sp design in my own project?

Yes, under the terms of its MIT license, which Ismael034 chose for the repository.

Can I test firmware for the Usb sp without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in usbsp

Similar boards