Usb sp dev
Ismael034·usbsp·hardware/dev/usb_sp_dev.kicad_pcb
About the Usb sp dev PCB
Usb sp dev is an open source RISC-V PCB design by Ismael034, published on GitHub under the MIT license. It is a 4-layer board measuring 76.1 × 70.7 mm, with 71 components from 31 distinct parts.
Its main chip is the CH32V203C8U6, from the RISC-V family. Other key parts include the ZD24C02B-MAGMT, TC-6601-5_0-260-8_3, SN74LVC1G08DBVR, TPS2121RUXR and SD101CWS. By type, the board carries 24 ICs, 15 capacitors, 14 resistors, 3 diodes, 2 crystals and 2 connectors.
From the project
Have you ever tried to plug a USB device into a computer that has USB restrictions enabled? It's frustrating, isn't it? You can't use your USB devices, and you have no way to bypass the restrictions. But what if I told you that you could spoof the USB identifiers so you bypass th
Have you ever tried to plug a USB device into a computer that has USB restrictions enabled? It's frustrating, isn't it? You can't use your USB devices, and you have no way to bypass the restrictions. But what if I told you that you could spoof the USB identifiers so you bypass these restrictions? That's where USBsp comes in.
USBsp is a USB device that can spoof the USB identifiers of any device you want. It is based on the CH32V203 and CH572D microcontrollers. With USBsp, you can easily bypass USB restrictions and use your USB devices without any issues.

Main components on the Usb sp dev
Usb sp dev bill of materials (BOM)
71 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ZD24C02B-MAGMT Zetta(澜智) | UDFN-8_L3.0-W2.0-P0.50-BL-EP-3 | U1 |
| 4 | TC-6601-5_0-260-8_3 XUNPU(讯普) | SW-SMD_4P-L6.0-W6.0-P4.50-LS8.2 | U2, U3, U4, U20 |
| 1 | SN74LVC1G08DBVR | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U5 |
| 1 | TPS2121RUXR | VQFN-HR-12_L2.5-W2.0-P0.50-BL | U6 |
| 1 | SD101CWS CJ(江苏长电/长晶) | D_SOD-323 | U7 |
| 1 | PZ254V-11-03P_C2937625 | HDR-TH_3P-P2.54-V-M | U8 |
| 1 | 32.768kHz JGHC(晶光华) | CRYSTAL-SMD_L3.2-W1.5-1 | U9 |
| 8 | RH-5015 | SMD_RH-5015 | U10, U11, U12, U13, U14, U15, U16, U17 |
| 2 | KH-TYPE-C-16P | USB-C-SMD_KH-TYPE-C-16P | U18, U23 |
| 1 | CH32V203C8U6 WCH(南京沁恒) | TQFN-48_L7.0-W7.0-P0.50-BL-EP5.5 | U19 |
| 1 | CH572D | QFN-20_L3.0-W3.0-P0.40-TL-EP1.7 | U21 |
| 2 | HX_PH254-01-04-Z-L11_5_STRAIGHT_PIN_HEADER | HDR-TH_4P-HX-PH254-01-04-Z-L11.5 | U22, U24 |
| 1 | 8MHz YJX(雅晶鑫) | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | XTM20032000DT00351001 | CRYSTAL-SMD_4P-L2.0-W1.6-BL | X2 |
| 2 | HDR-IDC-2_54-2X5P | IDC-TH_10P-P2.54_C5665 | P1, P2 |
| 1 | JK-SMD0805-020-30V JK(金科) | Fuse_0805_2012Metric | F1 |
| 1 | ME6211C33M5G-N MICRONE(南京微盟) | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | LDO1 |
| 6 | ~ | SMD-PAD-5x5 | SMD-PAD-5x1, SMD-PAD-5x2, SMD-PAD-5x3, SMD-PAD-5x4, SMD-PAD-5x5, SMD-PAD-5x6 |
| 1 | 10.0 QTJ6.3 SHOU HAN(首韩) | USB-A-SMD_10.0-QTJ6.3 | USB1 |
| 1 | XL-1608UGC-04 XINGLIGHT(成兴光) | LED_0603_1608Metric | LED1 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCD0603R1 国星光电 | LED_0603_1608Metric | PWR1 |
| 3 | USBLC6-2P6 TECH PUBLIC(台舟) | SOT-666-6_L1.6-W1.2-P0.50-LS1.6-BL | D1, D2, D3 |
| 1 | 100nF SAMSUNG(三星) | C_0402_1005Metric | C1 |
| 6 | 15pF FH(风华) | C_0402_1005Metric | C2, C3, C6, C7, C13, C14 |
| 3 | 10uF HRE(芯声) | C_0603_1608Metric | C4, C5, C8 |
| 4 | 100nF HRE(芯声) | C_0603_1608Metric | C9, C11, C12, C15 |
| 1 | 4.7uF SAMSUNG(三星) | C_0603_1608Metric | C10 |
| 6 | 10kΩ YAGEO(国巨) | R_0603_1608Metric | R1, R2, R3, R4, R6, R13 |
| 2 | 1kΩ | R_0603_1608Metric | R5, R7 |
| 5 | 5.1kΩ | R_0603_1608Metric | R8, R9, R10, R11, R12 |
| 1 | 25.5kΩ | R_0603_1608Metric | R14 |
Usb sp dev design files
The KiCad project lives in the Ismael034/usbsp repository on GitHub; these links point at the commit this page was built from.
Usb sp dev: common questions
What microcontroller does the Usb sp dev use?
The Usb sp dev is built around the CH32V203C8U6, from the RISC-V family.
How big is the Usb sp dev PCB?
The Usb sp dev measures 76.1 × 70.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Usb sp dev?
71 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb sp dev design files?
From the Ismael034/usbsp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Usb sp dev design in my own project?
Yes, under the terms of its MIT license, which Ismael034 chose for the repository.
Can I test firmware for the Usb sp dev without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in usbsp
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105