Mikrobus riser

Isno-Open·OpenSuperRF·hardware/accessories/mikrobus-riser/mikrobus-riser.kicad_pcb

Mikrobus riser PCB layout, top view — open source board by Isno-Open

About the Mikrobus riser PCB

Mikrobus riser is an open source PCB design by Isno-Open, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 25.4 × 48.4 mm, with 3 components from 3 distinct parts.

It belongs with the rf & radio designs in this gallery.

From the project

Design ouvert de la carte radio ISNO Super v1.0 (ESP32-S3, CC1101 433/868) pour firmwares radio comme OpenProfalux. CERN-OHL-S v2.

OpenSuperRF is the open design of the ISNO Super: a sub-GHz radio board built around an ESP32-S3, made to cleanly run open radio firmwares such as OpenProfalux (Profalux 868 MHz shutters in Home Assistant, no gateway).

This is the v1.0 (EVT), the version that was manufactured, assembled and measured. It is published here as open hardware. The board sold as a pre-order is the v1.1, a refinement (see v1.0 open, v1.1 sold).

Mikrobus riser, from the project README
From the project README

Mikrobus riser bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C165948
vers J2 Super (femelle 2x8 coudee)
J1
1
C492443
mikroBUS gauche (AN..GND)
J2
1
C496551
mikroBUS droite (PWM..GND)
J3

Mikrobus riser design files

The KiCad project lives in the Isno-Open/OpenSuperRF repository on GitHub; these links point at the commit this page was built from.

Mikrobus riser: common questions

How big is the Mikrobus riser PCB?

The Mikrobus riser measures 25.4 × 48.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mikrobus riser?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mikrobus riser design files?

From the Isno-Open/OpenSuperRF repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mikrobus riser design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which Isno-Open chose for the repository.

More boards in OpenSuperRF

Similar boards