Isno super v1.0

Isno-Open·OpenSuperRF·hardware/super/isno-super-v1.0.kicad_pcb

Isno super v1.0 PCB layout, top view — open source ESP32 board by Isno-Open

About the Isno super v1.0 PCB

Isno super v1.0 is an open source ESP32 PCB design by Isno-Open, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 67.3 × 55.2 mm, with 81 components from 40 distinct parts.

Its main chip is the ESP32-S3, from the ESP32 family. Other key parts include the E07-868, AP2114D, USBLC6, E07-433 and SGM2553. By type, the board carries 25 resistors, 21 capacitors, 16 diodes, 8 ICs, 6 connectors and 3 inductors.

It belongs with the rf & radio and iot & wireless designs in this gallery.

From the project

Design ouvert de la carte radio ISNO Super v1.0 (ESP32-S3, CC1101 433/868) pour firmwares radio comme OpenProfalux. CERN-OHL-S v2.

OpenSuperRF is the open design of the ISNO Super: a sub-GHz radio board built around an ESP32-S3, made to cleanly run open radio firmwares such as OpenProfalux (Profalux 868 MHz shutters in Home Assistant, no gateway).

This is the v1.0 (EVT), the version that was manufactured, assembled and measured. It is published here as open hardware. The board sold as a pre-order is the v1.1, a refinement (see v1.0 open, v1.1 sold).

Isno super v1.0, from the project README
From the project README

Main components on the Isno super v1.0

ESP32-S3E07-868AP2114DUSBLC6E07-433SGM2553

Isno super v1.0 bill of materials (BOM)

81 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3
U1
1
E07-868
U2
1
AP2114D
U3
1
USBLC6
U4
1
E07-433
U5
3
SGM2553
U6, U7, U8
1
C165948
USB-C
J1
1
C492443
mikroBUS/EXT
J2
1
C496551
SMA
J3
1
C160404
Qwiic
J4
2
C3173236
MS-156C3(20)
J5, J6
1
C720477
RESET
SW1
1
C720477
BOOT
SW2
1
LED
D1
1
C85402
ESD
D2
14
C48260
TVS_ESD
D3, D4, D5, D6, D7, D8, D9, D11 +6
1
33NH
33nH
L1
1
20NH
20nH
L2
1
9.1NH
9.1nH
L3
3
10UF
10uF
C1, C4, C6
Show 20 more
QtyPartRefs
1
22UF
22uF
C2
2
100NF
100nF
C3, C5
1
1UF
1uF
C7
1
47UF
47uF
C8
3
100PF
100pF
C9, C10, C11
1
4.7UF
4.7uF
C12
1
7.0PF
7.0pF
C13
1
2.4PF
2.4pF
C14
1
2.7PF
2.7pF
C15
3
100NF
100nF
C16, C18, C20
3
1UF
1uF
C17, C19, C21
1
330
R1
2
5.1K
5.1k
R2, R3
1
10K
10k
R4
3
10K
10k
R5, R12, R13
2
2.2K
2.2k
R10, R11
1
220K
220k
R14
4
100K
100k
R15, R17, R18, R19
1
150K
150k
R16
10
330
R20, R21, R22, R23, R24, R25, R26, R27 +2

Isno super v1.0 design files

The KiCad project lives in the Isno-Open/OpenSuperRF repository on GitHub; these links point at the commit this page was built from.

Isno super v1.0: common questions

What microcontroller does the Isno super v1.0 use?

The Isno super v1.0 is built around the ESP32-S3, from the ESP32 family.

How big is the Isno super v1.0 PCB?

The Isno super v1.0 measures 67.3 × 55.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Isno super v1.0?

81 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Isno super v1.0 design files?

From the Isno-Open/OpenSuperRF repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Isno super v1.0 design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which Isno-Open chose for the repository.

Can I test firmware for the Isno super v1.0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in OpenSuperRF

Similar boards