HALFLIFE---PENDANT
izyaandev·HALFLIFE---PENDANTPCB·hardware/pcb/half-life-pendant.kicad_pcb
About the HALFLIFE---PENDANT PCB
HALFLIFE---PENDANT is an open source PCB design by izyaandev, published on GitHub. It is a 2-layer board measuring 28 × 50 mm, with 11 components from 10 distinct parts.
By type, the board carries 4 resistors, 2 switches, 2 capacitors and 1 LED.
It belongs with the audio designs in this gallery.
From the project
A small wearable that listens for conversations, records them only when someone is actually talking, stores them, and uses AI to turn them into searchable summaries, so you never lose the thing someone said three weeks ago.
A small wearable that listens for conversations, records them only when someone is actually talking, stores them, and uses AI to turn them into searchable summaries, so you never lose the thing someone said three weeks ago.
I'm Izyaan and this is my Hack Club Half Life project. A recorder you wear is only okay if the people around you can trust it, so the whole design starts from one rule: privacy comes first, and it has to be physical.

HALFLIFE---PENDANT bill of materials (BOM)
11 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BAT1 | power_source_jst2_p2mm_ph | BAT1 |
| 1 | MIC1 | pin_header_pinrow6_p2_54_nopinlabels_female | MIC1 |
| 1 | SW | switch_pinrow2_p2_54mm | SW1 |
| 1 | SW2 | push_button_smdpushbutton | SW2 |
| 1 | LED | led_0603_color_red | LED1 |
| 1 | 100nF | capacitor_cap0603 | C1 |
| 1 | 10uF | capacitor_cap0805 | C2 |
| 1 | 220Ω | resistor_res0603 | R1 |
| 1 | 100kΩ | resistor_res0603 | R2 |
| 2 | 200kΩ | resistor_res0603 | R3, R4 |
HALFLIFE---PENDANT design files
The KiCad project lives in the izyaandev/HALFLIFE---PENDANTPCB repository on GitHub; these links point at the commit this page was built from.
HALFLIFE---PENDANT: common questions
How big is the HALFLIFE---PENDANT PCB?
The HALFLIFE---PENDANT measures 28 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HALFLIFE---PENDANT?
11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HALFLIFE---PENDANT design files?
From the izyaandev/HALFLIFE---PENDANTPCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HALFLIFE---PENDANT design in my own project?
The repository has no license, so all rights stay with izyaandev. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687