SolarMeshMiniPDB

jaisor·SolarMeshMiniPDB

SolarMeshMiniPDB PCB layout, top view — open source board by jaisor

About the SolarMeshMiniPDB PCB

SolarMeshMiniPDB is an open source PCB design by jaisor, published on GitHub. It is a 2-layer board measuring 20 × 12 mm, with 8 components from 6 distinct parts.

Other key parts include the CN3163. By type, the board carries 3 resistors, 2 diodes, 2 capacitors and 1 IC.

It belongs with the power & battery and rf & radio designs in this gallery.

From the project

20 x 12 mm solar charger (CN3163) and power distribution board for a mini handheld LoRa mesh node. KiCad 10.

Minimal solar charger and power distribution board, sized to power a mini handheld LoRa mesh node. It has solder pads for a 5 V solar panel, a 1S Li-ion battery, a load, and an external switch that breaks the positive wire to the load. A CN3163 charges the battery from the panel at up to 1 A, like the SD05CRMA module, with the same two status LEDs: red while charging, green when the battery is full. 20 × 12 mm, two M2 mounting holes.

SolarMeshMiniPDB, from the project README
From the project README

Main components on the SolarMeshMiniPDB

SolarMeshMiniPDB bill of materials (BOM)

8 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CN3163
U1
1
RED
D1
1
GREEN
D2
2
10uF/10V
C1, C2
1
1.2k 1%
R1
2
1k
R2, R3

SolarMeshMiniPDB design files

The KiCad project lives in the jaisor/SolarMeshMiniPDB repository on GitHub; these links point at the commit this page was built from.

SolarMeshMiniPDB: common questions

How big is the SolarMeshMiniPDB PCB?

The SolarMeshMiniPDB measures 20 × 12 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SolarMeshMiniPDB?

8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SolarMeshMiniPDB design files?

From the jaisor/SolarMeshMiniPDB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SolarMeshMiniPDB design in my own project?

The repository has no license, so all rights stay with jaisor. Use it as a reference, and ask the author before reusing the design.

Similar boards