Rf lna

Jakcar22·rf-lna

Rf lna PCB layout, top view — open source board by Jakcar22

About the Rf lna PCB

Rf lna is an open source PCB design by Jakcar22, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 10 components from 7 distinct parts.

Other key parts include the SPF5189Z. By type, the board carries 4 capacitors, 3 connectors, 2 inductors and 1 IC.

It belongs with the audio and rf & radio designs in this gallery.

From the project

915 MHz GaAs MMIC Low Noise Amplifier (LNA) PCB built around the Qorvo SPF5189Z. KiCAD design (DRC clean), LTspice bias and supply-filter simulation, planned ADS S-parameter analysis and VNA validation. v2 migration to SPF5043Z planned.

A 915 MHz low-noise amplifier printed circuit board built around a Qorvo GaAs pHEMT MMIC, designed as part of a self-directed RF hardware project targeting aerospace and defense applications.

This project takes a commercial GaAs MMIC LNA and builds a complete RF front-end PCB around it: bias network, supply filtering, DC blocking, and 50 Ω microstrip routing. The goal is end-to-end ownership of an RF design from datasheet study through KiCAD layout, simulation, fabrication, and VNA validation.

Main components on the Rf lna

Rf lna bill of materials (BOM)

10 components, 7 distinct parts.

QtyPartRefs
1
SPF5189Z
U1
2
Conn_Coaxial
J1, J2
1
Conn_01x02_Pin
J3
1
1.5nH
L1
1
150nH
L2
1
100nf
C1
3
100pF
C2, C3, C4

Rf lna design files

The KiCad project lives in the Jakcar22/rf-lna repository on GitHub; these links point at the commit this page was built from.

Rf lna: common questions

How big is the Rf lna PCB?

The Rf lna measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rf lna?

10 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rf lna design files?

From the Jakcar22/rf-lna repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rf lna design in my own project?

The repository has no license, so all rights stay with Jakcar22. Use it as a reference, and ask the author before reusing the design.

Similar boards