CustomMacroDeck
Jakov4848·CustomMacroDeck·kicad_files/macropad.kicad_pcb
About the CustomMacroDeck PCB
CustomMacroDeck is an open source AVR/Arduino PCB design by Jakov4848, published on GitHub. It is a 2-layer board measuring 69.5 × 117.5 mm, with 80 components from 22 distinct parts.
Its main chip is the ATmega32U4-A, from the AVR/Arduino family. By type, the board carries 27 diodes, 22 capacitors, 13 switches, 12 resistors, 3 connectors and 1 IC.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
A custom macropad project featuring custom PCB design, laser-cut enclosure, and dedicated firmware implementation.
This repository contains the hardware and software files for an open-source, programmable macropad keyboard based on the Arduino platform. Developed as a bachelor's thesis, this device allows users to store keyboard shortcuts directly on the hardware's memory, eliminating the need for complex PC software while improving daily workflow productivity.
- Native USB HID Emulation: Powered by an ATmega32U4 microcontroller with an integrated USB controller, meaning it works plug-and-play on any computer without extra drivers. - Mechanical Switch Matrix: Features a 12-key grid with anti-ghosting…

Main components on the CustomMacroDeck
CustomMacroDeck bill of materials (BOM)
80 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-A | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Crystal | Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Top_Bottom | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Fuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | SW_Push | SW_SPST_CK_RS282G05A3 | SW1 |
| 12 | SW_Push | SW_Hotswap_Kailh_MX_1.00u | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +4 |
| 12 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13, D27 |
| 1 | D_Schottky | D_SOD-123 | D14 |
| 12 | WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm_edited | D15, D16, D17, D18, D19, D20, D21, D22 +4 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 22pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 18 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C6, C8, C9, C10, C11, C12 +10 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 2 | 5.1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | 1K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R12 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 470ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
CustomMacroDeck design files
The KiCad project lives in the Jakov4848/CustomMacroDeck repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad_files/macropad.kicad_pcb
- Schematickicad_files/macropad.kicad_sch
CustomMacroDeck: common questions
What microcontroller does the CustomMacroDeck use?
The CustomMacroDeck is built around the ATmega32U4-A, from the AVR/Arduino family.
How big is the CustomMacroDeck PCB?
The CustomMacroDeck measures 69.5 × 117.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CustomMacroDeck?
80 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the CustomMacroDeck design files?
From the Jakov4848/CustomMacroDeck repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CustomMacroDeck design in my own project?
The repository has no license, so all rights stay with Jakov4848. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CustomMacroDeck without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k