STM32 bazel development
jalikins·STM32_bazel_development·vehicle/mkiii/hardware/example/stm32_g4_dev_board/stm32g441kbt6 development.kicad_pcb
About the STM32 bazel development PCB
STM32 bazel development is an open source STM32 PCB design by jalikins, published on GitHub under the MIT license. It is a 2-layer board measuring 64.7 × 35.3 mm, with 53 components from 38 distinct parts.
Its main chip is the STM32G441KBT6, from the STM32 family. Other key parts include the MCP2561-E/SN and AP63203WU-7. By type, the board carries 14 capacitors, 12 test points, 9 resistors, 8 diodes, 3 ICs and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This repository contains a hermetic Bazel build configuration for STM32 microcontrollers (specifically targeting the STM32G4 series). It handles toolchain management, HAL dependencies, and provides convenient commands for building, flashing, and debugging firmware.
This repository contains a hermetic Bazel build configuration for STM32 microcontrollers (specifically targeting the STM32G4 series). It handles toolchain management, HAL dependencies, and provides convenient commands for building, flashing, and debugging firmware.
This creates the .elf file inside the bazel-bin directory.
OpenOCD and GDB are the primary tools and can be used together for debugging STM32 applications. OpenOCD provides the interface to the hardware, while GDB is used to inspect and control the execution of the program.

Main components on the STM32 bazel development
STM32 bazel development bill of materials (BOM)
53 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G441KBT6 | STM32G441KBT6 | U1 |
| 1 | MCP2561-E/SN MCP2561-E_SN | SOIC127P600X175-8N | U2 |
| 1 | AP63203WU-7 | AP63203WU-7_DIO | U3 |
| 1 | 7M-16.000MAAJ-T X_Crystal_16MHz_18pF | Crystal_TXC7M | Y1 |
| 1 | CONN_pcie_x1 | pcie_x1 | J1 |
| 1 | Programming_Pin_Header | Programming_Pin_Header_Keyed | J2 |
| 2 | 0ZCH0050FF2G F_500mA_16V | Fuse_1210 | F1, F2 |
| 1 | B3U-1000P INTERRUPT TEST SWITCH | SW_B3U-1000P_4.2x1.7mm | SW1 |
| 1 | 5019 3V3 | Test_Point_SMD | TP1 |
| 1 | 5019 5V | Test_Point_SMD | TP2 |
| 1 | 5019 EXT_SIG_1 | Test_Point_SMD | TP3 |
| 1 | 5019 EXT_SIG_2 | Test_Point_SMD | TP4 |
| 1 | 5019 EXT_SIG_3 | Test_Point_SMD | TP5 |
| 1 | 5019 EXT_SIG_4 | Test_Point_SMD | TP6 |
| 1 | 5019 EXT_SIG_5 | Test_Point_SMD | TP7 |
| 1 | 5019 EXT_SIG_6 | Test_Point_SMD | TP8 |
| 1 | 5019 EXT_SIG_7 | Test_Point_SMD | TP9 |
| 1 | 5019 EXT_SIG_8 | Test_Point_SMD | TP10 |
| 1 | 5019 EXT_SIG_9 | Test_Point_SMD | TP11 |
| 1 | 5019 GND | Test_Point_SMD | TP12 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B1701TW--20P000314U1930 3V3 POWER | CHIPLED_0805 | D1 |
| 1 | B1701TW--20P000314U1930 5V POWER | CHIPLED_0805 | D2 |
| 1 | B1701TW--20P000314U1930 HEARTBEAT | CHIPLED_0805 | D3 |
| 1 | NRST | CHIPLED_0805 | D4 |
| 1 | SWDIO | CHIPLED_0805 | D5 |
| 1 | INTERRUPT_TEST_HW | CHIPLED_0805 | D6 |
| 1 | INTERRUPT_TEST_SW | CHIPLED_0805 | D7 |
| 1 | PWM_TEST | CHIPLED_0805 | D8 |
| 1 | L_3.9uH | IND_BOURNS_SRR5018 | L1 |
| 5 | CL10B104KB8NNWC C_0.1uF | C_0603 | C1, C2, C5, C6, C11 |
| 1 | CL10B103KB8NNNC C_10nF | C_0603 | C3 |
| 1 | CL10B105KA8NNNC C_1uF | C_0603 | C4 |
| 1 | GRT188R61E475ME13D C_4.7uF | C_0603 | C7 |
| 2 | LMK107BBJ106KALT C_10uF | C_0603 | C8, C12 |
| 2 | CL31A226KAHNNNE C_22uF | C_1206_3216Metric | C9, C10 |
| 2 | CML0603C0G300JT50V C_30pF | C_0603 | C13, C14 |
| 1 | RC0603FR-13120RL R_120 | R_0603 | R1 |
| 8 | RMCF0603FT1K00 R_1K | R_0603 | R2, R3, R4, R5, R6, R7, R8, R9 |
STM32 bazel development design files
The KiCad project lives in the jalikins/STM32_bazel_development repository on GitHub; these links point at the commit this page was built from.
STM32 bazel development: common questions
What microcontroller does the STM32 bazel development use?
The STM32 bazel development is built around the STM32G441KBT6, from the STM32 family.
How big is the STM32 bazel development PCB?
The STM32 bazel development measures 64.7 × 35.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32 bazel development?
53 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32 bazel development design files?
From the jalikins/STM32_bazel_development repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32 bazel development design in my own project?
Yes, under the terms of its MIT license, which jalikins chose for the repository.
Can I test firmware for the STM32 bazel development without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k