126 open source boards using the AP63203WU-7
Real designs built with the AP63203WU-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Doorman S3
AzonInc
37.1 × 37.2 mm32 parts4LGPL-3.0241ESP32
FujiNet-Astrocade-Rev0
FujiNetWIFI
96 × 58 mm77 parts6LCERN-OHL-S-2.0138ESP32
Skysweep32 rev c
bobberdolle1
150 × 95 mm91 parts4LGPL-3.034ESP32
Sand drawing
tjhowse
54.2 × 81.5 mm27 parts2LCustom license24ESP32
Firestarter
hstarmans
88.4 × 63.6 mm120 parts4LCC-BY-NC-4.09ESP32
Bird3
ysoyjcgoxohxoh
43 × 108 mm61 parts2LMIT8- schematic only · 53 partsSTM32
Wmd6c servo
ChipCreates
53 partsMIT5 STM32
EIM
bhorst519
170.6 × 121.1 mm226 parts2LNo license3Raspberry Pi
Board v3-83pct
dmz006
150 × 112 mm299 parts4LCustom license2RP2040/RP2350
Raspberry pi power hub
tobycm
39 × 27 mm65 parts2LMIT2RP2040/RP2350
Devboardrp2350
espcaa
59.2 × 26.4 mm43 parts4LNo license2RP2040/RP2350
Spark
ratmuds
82 × 55 mm196 parts4LNo license1AVR/Arduino
Phmeter
Hackuarium
100 × 87 mm145 parts2LCustom license1RP2040/RP2350
Tool power supply
UBC-Hacker-Fab
90 × 160 mm121 parts4LNo license1ESP32
Four motor controller
jonathanrandall
110.9 × 90.6 mm113 parts4LCERN-OHL-P-2.01ESP32
Esp32-cc1101-multiband
bdini13
90 × 36 mm105 parts4LCustom license1ESP32
TI83x
pjschinske
72.5 × 170 mm103 parts4LCERN-OHL-S-2.01ESP32
Integrated
hicancan
100 × 85 mm99 parts4LAGPL-3.01Skibidi thinkbook-14-hub
tobycm
40 × 70 mm94 parts4LMIT1AVR/Arduino
LoadShed
DJM0
151.2 × 89.3 mm90 parts2LMIT1ESP32
TrailCurrentTapper
trailcurrentoss
113.4 × 65.8 mm46 parts2LMIT1STM32
Stm32-can node
mrk-its
40 × 25 mm40 parts4LNo license1ESP32
TrailCurrentBearing
trailcurrentoss
48.4 × 44.1 mm15 parts2LMIT1- schematic only · 61 partsESP32
Development of a-Multi-Channel-CAN-Interface-Control-System
MantasM11
61 partsNo license1 ESP32
Compact-S1-placement
ddasdkimo
160 × 110 mm694 parts2LNo license0STM32
Relock Artiq
KLFAMO
161 × 100 mm375 parts4LNo license0Microchip SAM
MAIN
BarrettT123
174.6 × 124.6 mm354 parts6LNo license0Current100A Artiq
KLFAMO
161 × 100 mm324 parts4LNo license0ESP32
MPE HUB
felixmanfredi
117 × 107 mm235 parts4LNo license0ESP32
Usb scoring platform
AndrewCraswell
165 × 100 mm223 parts4LMIT0ESP32
PLC4UNI
0sirys
102.4 × 83.1 mm207 parts4LMIT0ESP32
PCB EU
nikolajevs
100 × 100 mm188 parts4LNo license0ESP32
Controller core reva
itorralbo
141.6 × 135.2 mm187 parts4LMIT0ESP32
Micromouse
MukeshSethy
100 × 120 mm177 parts4LNo license0Esp32-hdmi quad splitter
gyuhooo
115 × 110 mm142 parts4LMIT0RP2040/RP2350
Microcouple
georgesleen
29.5 × 34.3 mm129 parts4LMIT0
How designs wire the AP63203WU-7
Read from the KiCad layouts of 79 open source designs, one per repository: what each pin of the AP63203WU-7 connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a series capacitor on 76 of 79 designs, most often 100 nF.
- The BST pin has a series capacitor on 76 of 79 designs, most often 100 nF.
- The SW pin has a inductor on 73 of 79 designs, most often 4.7 µH (then 3.9 µH).
- The VIN pin has a decoupling capacitor on 70 of 79 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| FBpin 1 | Connected to: 3.3V 78% · a signal 19% |
|
| ENpin 2 | Connected to: 12V 63% · a signal 33% | — |
| VINpin 3 | Connected to: 12V 68% · a signal 30% |
|
| GNDpin 4 | Connected to: GND 96% | — |
| SWpin 5 | Connected to: Signal 96% |
|
| BSTpin 6 | Connected to: Signal 96% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Doorman S3 by AzonInc, FujiNet-Astrocade-Rev0 by FujiNetWIFI, Skysweep32 rev c by bobberdolle1 and Sand drawing by tjhowse.
The AP63203WU-7 in open source designs
The gallery holds 126 open source boards using the AP63203WU-7 from 81 GitHub repositories; a typical one measures about 90 × 71.5 mm and carries around 77 components.
62% use four copper layers or more, and 48% carry an open source license.
The most starred is Doorman S3 by AzonInc.
Parts used alongside the AP63203WU-7
Microcontrollers on boards using the AP63203WU-7
What boards using the AP63203WU-7 are built for
AP63203WU-7: common questions
Where can I find a AP63203WU-7 reference design?
Each of the 126 boards on this page is a real design using the AP63203WU-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP63203WU-7 SW pin connected?
The SW pin has a series capacitor on 76 of 79 designs, most often 100 nF. Counted from the KiCad layouts of 79 open source designs using the AP63203WU-7.
How is the AP63203WU-7 BST pin connected?
The BST pin has a series capacitor on 76 of 79 designs, most often 100 nF. Counted from the KiCad layouts of 79 open source designs using the AP63203WU-7.
What decoupling capacitors do designs use on the AP63203WU-7 VIN pin?
The VIN pin has a decoupling capacitor on 70 of 79 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 79 open source designs using the AP63203WU-7.
What parts are used alongside the AP63203WU-7?
The USBLC6-2SC6, ESP32-S3-WROOM-1-N16R8, ESP32-S3-WROOM-1-N8R8, RP2040 and SN65HVD230 appear in the most repositories here.
Which microcontrollers do boards using the AP63203WU-7 use?
Most are built on ESP32 (75), RP2040/RP2350 (17), STM32 (15) and Raspberry Pi (4).
How big is a typical board using the AP63203WU-7?
The median is 90 × 71.5 mm, and 38% are two-layer designs.
What is the most popular open source board using the AP63203WU-7?
By GitHub stars, Doorman S3 by AzonInc, with 241 stars.
Can I simulate one of these boards using the AP63203WU-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.