9 open source boards using the STM32G441KBT6

Real designs built with the STM32G441KBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the STM32G441KBT6

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32G441KBT6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
  • The PF0-OSC_IN pin has a capacitor to GND on 4 of 5 designs, most often 6.8 pF (then 27 pF).
  • The (GPIO_EXTI10)PG10-NRST pin has a capacitor to GND on 4 of 5 designs, most often 100 nF.
  • The VDDA pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 100 nF).
VDDpin 1, 17Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (2), 10 µF (1), 4.7 µF (1)
PF0-OSC_INpin 2Connected to: Signal 80% · not connected 20%
  • Crystal on 80%
  • Capacitor to GND on 80% · 6.8 pF (1), 27 pF (1)
PF1-OSC_OUTpin 3Connected to: Signal 80% · not connected 20%
  • Crystal on 60%
  • Capacitor to GND on 60% · 6.8 pF (1)
(GPIO_EXTI10)PG10-NRSTpin 4Connected to: A connector 60% · not connected 20%
  • Capacitor to GND on 80% · 100 nF (2)
  • Series resistor on 40% · 22.1 Ω (1)
(TIM2_ETR/TIM2_CH1/GPIO_pin 5, 10Connected to: Signal 60% · not connected 40%
  • Series resistor on 60% · 330 kΩ (1), 100 Ω (1)
(TIM15_CH1N/TIM2_CH2/GPIpin 6Connected to: Signal 60% · not connected 40%
  • Series resistor on 60% · 200 kΩ (1), 100 Ω (1)
(TIM15_CH1/USART2_TX/TIMpin 7Connected to: Not connected 60% · a signal 40%
(TIM15_CH2/USART2_RX/TIMpin 8Connected to: Not connected 80% · a signal 20%
(USART2_CK/TIM3_CH2/GPIOpin 9Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 12.1 kΩ (1)
(TIM3_CH1/TIM16_CH1/GPIOpin 11Connected to: Not connected 60% · a signal 40%
PB0pin 13Connected to: Not connected 60% · a signal 40%
VSSApin 14Connected to: GND 100%
VDDApin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 1 µF (2), 100 nF (1), 10 nF (1)
VSSpin 16, 32Connected to: GND 100%
PA9pin 19Connected to: A connector 40% · not connected 20%
  • Series resistor on 40% · 1.6 kΩ (1), 1 kΩ (1)
(SYS_JTMS-SWDIO/GPIO_EXTpin 23Connected to: A connector 80%
  • Series resistor on 40% · 22.1 Ω (1)
PB6pin 29Connected to: Not connected 60% · a signal 40%
PB7pin 30Connected to: Not connected 60% · a signal 40%
(TIM4_CH3/TIM16_CH1/GPIOpin 31Connected to: Signal 60% · not connected 40%
  • Resistor to GND on 40% · 10 kΩ (2)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bms core by olin-electric-motorsports, FS-4 Charging Board by formulaslug, Airsticks by lizboyer and STM32 bazel development by jalikins.

The STM32G441KBT6 in open source designs

The gallery holds 9 open source boards using the STM32G441KBT6 from 5 GitHub repositories; a typical one measures about 56.5 × 35.3 mm and carries around 57 components.

67% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is Bms core by olin-electric-motorsports.

Parts used alongside the STM32G441KBT6

Microcontrollers on boards using the STM32G441KBT6

What boards using the STM32G441KBT6 are built for

STM32G441KBT6: common questions

Where can I find a STM32G441KBT6 reference design?

Each of the 9 boards on this page is a real design using the STM32G441KBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32G441KBT6 VDD pin?

The VDD pins have a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the STM32G441KBT6.

How is the STM32G441KBT6 PF0-OSC_IN pin connected?

The PF0-OSC_IN pin has a capacitor to GND on 4 of 5 designs, most often 6.8 pF (then 27 pF). Counted from the KiCad layouts of 5 open source designs using the STM32G441KBT6.

How is the STM32G441KBT6 (GPIO_EXTI10)PG10-NRST pin connected?

The (GPIO_EXTI10)PG10-NRST pin has a capacitor to GND on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the STM32G441KBT6.

Which microcontrollers do boards using the STM32G441KBT6 use?

Most are built on STM32 (9).

How big is a typical board using the STM32G441KBT6?

The median is 56.5 × 35.3 mm, and 67% are two-layer designs.

What is the most popular open source board using the STM32G441KBT6?

By GitHub stars, Bms core by olin-electric-motorsports, with 13 stars.

Can I simulate one of these boards using the STM32G441KBT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part