RGB-to component
About the RGB-to component PCB
RGB-to component is an open source PCB design by jamvanderloeff, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 70 mm, with 58 components from 33 distinct parts.
Other key parts include the SC6206B-65K5, RS8752XK, THS7374, LM1881 and 74HC86. By type, the board carries 29 resistors, 13 capacitors, 5 ICs, 4 connectors, 1 jumper and 1 diode.
Main components on the RGB-to component
RGB-to component bill of materials (BOM)
58 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SC6206B-65K5 | SOT-23 | U1 |
| 1 | RS8752XK | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | THS7374 | TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | LM1881 | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | 74HC86 | TSSOP-14_4.4x5mm_P0.65mm | U10 |
| 1 | VGA | VGA_CONN | J1 |
| 1 | C283540 USB_C_Receptacle_Power | USB_C_Receptacle_Generic_Power_Only | J3 |
| 1 | SCART_CONN | SCART_CONN | J4 |
| 1 | 3XRCA_CONN 3xRCA_CONN | 3xRCA_CONN_SINGLE | J5 |
| 1 | Fiducial | uwuriel | GOTE1 |
| 1 | Fiducial | borgar | GOTE2 |
| 1 | JUMPER_3_BRIDGED12 Jumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 2 | Conn_Coaxial | Cheapo_RCA_single_edge | JR1, JU1 |
| 1 | LED | LED_0805_2012Metric | D101 |
| 1 | 10UH 10uH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L101 |
| 3 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3 |
| 7 | 100N 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C8, C10, C11, C12, C13, C14 |
| 1 | 10U 10u | CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C5 |
| 1 | 100U 100u | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C7 |
| 1 | 10U 10u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R14, R19, R20, R24, R101 |
| 1 | 1K33 1k33 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 7 | 75 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R5, R9, R10, R11, R15 |
| 2 | 1K402 1k402 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7 |
| 1 | 510 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 2 | 4K7 4k7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12, R27 |
| 2 | 1K27 1k27 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13, R28 |
| 2 | 5K1 5k1 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R17 |
| 1 | 680K 680k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R18 |
| 1 | 511 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21 |
| 1 | 2740 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22 |
| 1 | 300 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R23 |
| 2 | 1K77 1k77 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R25, R26 |
RGB-to component design files
The KiCad project lives in the jamvanderloeff/RGB-to-component repository on GitHub; these links point at the commit this page was built from.
RGB-to component: common questions
How big is the RGB-to component PCB?
The RGB-to component measures 50 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RGB-to component?
58 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RGB-to component design files?
From the jamvanderloeff/RGB-to-component repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RGB-to component design in my own project?
Yes, under the terms of its MIT license, which jamvanderloeff chose for the repository.