68 open source boards using the 74HC86
Real designs built with the 74HC86, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Minimal-64x4-Home-Computer
slu4coder
245.1 × 160 mm134 parts2LNo license3238-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184Minimal-64-Home-Computer
slu4coder
306.1 × 130.2 mm127 parts2LNo license93Ethernet to SPI adapter, Nucleo-64 shield
imihajlow
69 × 74 mm48 parts4LGPL-3.069Controller
profdc9
100 × 100 mm180 parts2LNo license59Add sub
tmarhguy
110 × 117 mm200 parts2LMIT47AVR/Arduino
Minimal-UART-Computer-3
slu4coder
208.9 × 170.8 mm202 parts2LNo license43Boatcontrol
antevens
535 × 308 mm623 parts4LSHL-2.136Omronkbd
zuiko21
250.8 × 130.2 mm115 parts2LMIT238 16 computer 2
halfburnttoast
208 × 110 mm111 parts2LNo license21RGB-to component
jamvanderloeff
50 × 70 mm58 parts2LMIT13FreeDSPx-ADAT-IO-x4
freeDSP
100 × 100 mm114 parts2LNo license10CFT Processor Board 0
alexiosc
233.4 × 280 mm274 parts2LGPL-3.06Jammanator pi
KabukiFlux
132.5 × 105.8 mm142 parts2LMIT4CP297s
Danjovic
155.1 × 156 mm127 parts2LGPL-3.04CPU2908CP4
m-okada
240 × 195 mm590 parts2LNo license3ESP32
TSAL G V4 2
HKUST-Red-Bird-Racing-EVRT
140 × 60 mm117 parts2LNo license3IrrigationPiHat
Cameron-Ray
65.2 × 30.1 mm85 parts6LMIT2Supercar larson scanner
hkzlab
63.5 × 43.6 mm41 parts2LCC-BY-NC-4.02Joytester
mistepien
80 × 100 mm38 parts2LGPL-3.02Cisc-8
nailed-barnacle
299.7 × 198.1 mm315 parts2LMIT1SMS-3D-glasses genesis cart stack
abzman
83.8 × 60.8 mm29 parts2LUnlicense1Coco3AppleRGB
mrojas36
78.7 × 47 mm9 parts2LCC0-1.01- schematic only · 112 parts
MSAP-1
mehrantsi
112 partsMIT1 Micro
jurendono
200 × 150 mm175 parts2LNo license0Talisman
mzollin
61 × 61 mm158 parts2LMIT0V2
durangoretro
177.8 × 130.8 mm148 parts2LNo license0Microchip SAM
Motherboard
MuddJTS
141.5 × 53.8 mm134 parts4LNo license0Excalibur64
Cptscorcher
209 × 175 mm125 parts2LGPL-3.00Minimal-UART-Computer
slowcorners
191.8 × 121.3 mm109 parts2LNo license0Revolwer
thefoolGame
100 × 100 mm91 parts2LNo license0Minimal-UART-CPU-Dev
slowcorners
180.3 × 112.4 mm89 parts2LNo license0Minimal-UART-CPU-FLASH-Edition
tlhconsulting
177.2 × 114.3 mm81 parts2LNo license08-Bit CPU
otterbox901
160 × 140 mm65 parts2LNo license04-Bit-Binary-Adder
Nikhil-Misal-24
110.5 × 82.8 mm55 parts2LNo license0Clockmodule flipflop
JopjeKnopje
256.7 × 47 mm41 parts2LNo license0
How designs wire the 74HC86
Read from the KiCad layouts of 53 open source designs, one per repository: what each pin of the 74HC86 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 30 of 53 designs, most often 100 nF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1A_1pin 1 | Connected to: A connector 25% |
|
| GNDpin 7 | Connected to: GND 94% | — |
| VCCpin 14 | Connected to: 5V 92% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Minimal-64x4-Home-Computer by slu4coder, 8-Bit CPU 32k by slu4coder, Mainboard by ukmars and Minimal-64-Home-Computer by slu4coder.
The 74HC86 in open source designs
The gallery holds 68 open source boards using the 74HC86 from 56 GitHub repositories; a typical one measures about 155 × 100.3 mm and carries around 100 components.
82% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Minimal-64x4-Home-Computer by slu4coder.
Parts used alongside the 74HC86
Microcontrollers on boards using the 74HC86
What boards using the 74HC86 are built for
74HC86: common questions
Where can I find a 74HC86 reference design?
Each of the 68 boards on this page is a real design using the 74HC86. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC86 VCC pin?
The VCC pin has a decoupling capacitor on 30 of 53 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 53 open source designs using the 74HC86.
What parts are used alongside the 74HC86?
The 74HC08, 74HC00, 74HC32, 74HC02 and 74HC04 appear in the most repositories here.
Which microcontrollers do boards using the 74HC86 use?
Most are built on AVR/Arduino (2), ESP32 (1) and Microchip SAM (1).
How big is a typical board using the 74HC86?
The median is 155 × 100.3 mm, and 82% are two-layer designs.
What is the most popular open source board using the 74HC86?
By GitHub stars, Minimal-64x4-Home-Computer by slu4coder, with 323 stars.
Can I simulate one of these boards using the 74HC86 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.