16 open source boards using the THS7374
Real designs built with the THS7374, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MegaAV Pro VA0
RIP-Felix
50 × 50 mm153 parts4LCERN-OHL-S-2.049AVR/Arduino
Wii-BVM-Card
Shank-Mods
105 × 160 mm106 parts2LNo license26N64rgb v3
borti4938
160.3 × 25.5 mm43 parts2LGPL-3.024Betsubetsu
buffis
110.6 × 77.9 mm37 parts2LCC-BY-4.022AVR/Arduino
Bkm-129x simple
skumlos
105 × 89.3 mm55 parts2LWTFPL19AVR/Arduino
Bkm-129x scart vga
skumlos
105 × 160 mm67 parts2LNo license15RGB-to component
jamvanderloeff
50 × 70 mm58 parts2LMIT13Microchip SAM
OSSW - Open Scart Switch - Main
BinaryS010
401.6 × 130.1 mm310 parts4LGPL-3.07FPGA
Bkm-68x simple
skumlos
230.4 × 233.5 mm206 parts2LCERN-OHL-W-2.07Ta7357p
ldursw
23.5 × 8.4 mm13 parts6LMIT4MCR prototype
alanswx
267.1 × 198.7 mm141 parts4LNo license0E800j scartman
codepainters
88 × 36.5 mm55 parts2LNo license0Inline-SCART-Splitter
arithmaldor
59 × 42.7 mm37 parts2LCERN-OHL-1.20MegaAV rev0.5
RIP-Felix
50 × 50 mm143 parts4LCERN-OHL-S-2.049N64rgb v3.prod
borti4938
160.3 × 25.5 mm43 parts2LGPL-3.024MegaAV Saturn rev0.2
RIP-Felix
40.4 × 55 mm133 parts2LCERN-OHL-S-2.049
How designs wire the THS7374
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the THS7374 connects to, and the resistors, capacitors and other passives placed on it.
- The CH3_OUT pin has a series resistor on 11 of 13 designs, most often 75 Ω (then 150 Ω).
- The CH2_OUT pin has a series resistor on 11 of 13 designs, most often 75 Ω (then 150 Ω).
- The CH1_OUT pin has a series resistor on 11 of 13 designs, most often 75 Ω (then 150 Ω).
- The DISABLE pin is tied to GND on 12 of 13 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CH1_INpin 1 | Connected to: Signal 92% |
|
| CH2_INpin 2 | Connected to: Signal 92% |
|
| CH3_INpin 3 | Connected to: Signal 85% · GND 15% |
|
| CH4_INpin 4 | Connected to: Signal 85% · GND 15% |
|
| GNDpin 5 | Connected to: GND 92% | — |
| DISABLEpin 6 | Connected to: GND 92% | — |
| NCpin 7, 8 | Connected to: Not connected 100% | — |
| BYPASSpin 9 | Connected to: 3.3V 46% · a signal 46% |
|
| VS+pin 10 | Connected to: 5V 100% |
|
| CH4_OUTpin 11 | Connected to: Signal 85% · not connected 15% |
|
| CH3_OUTpin 12 | Connected to: Signal 85% · not connected 15% |
|
| CH2_OUTpin 13 | Connected to: Signal 92% |
|
| CH1_OUTpin 14 | Connected to: Signal 92% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MegaAV Pro VA0 by RIP-Felix, Wii-BVM-Card by Shank-Mods, N64rgb v3 by borti4938 and Betsubetsu by buffis.
The THS7374 in open source designs
The gallery holds 16 open source boards using the THS7374 from 13 GitHub repositories; a typical one measures about 105 × 62.5 mm and carries around 63 components.
69% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is MegaAV Pro VA0 by RIP-Felix.
Parts used alongside the THS7374
Microcontrollers on boards using the THS7374
What boards using the THS7374 are built for
THS7374: common questions
Where can I find a THS7374 reference design?
Each of the 16 boards on this page is a real design using the THS7374. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the THS7374 CH3_OUT pin?
The CH3_OUT pin has a series resistor on 11 of 13 designs, most often 75 Ω (then 150 Ω). Counted from the KiCad layouts of 13 open source designs using the THS7374.
What resistor goes on the THS7374 CH2_OUT pin?
The CH2_OUT pin has a series resistor on 11 of 13 designs, most often 75 Ω (then 150 Ω). Counted from the KiCad layouts of 13 open source designs using the THS7374.
What resistor goes on the THS7374 CH1_OUT pin?
The CH1_OUT pin has a series resistor on 11 of 13 designs, most often 75 Ω (then 150 Ω). Counted from the KiCad layouts of 13 open source designs using the THS7374.
What parts are used alongside the THS7374?
The ADG1611, Arduino Nano v3, LM1881, 74LVC125 and MIC3490-3.3 appear in the most repositories here.
Which microcontrollers do boards using the THS7374 use?
Most are built on AVR/Arduino (3), FPGA (1) and Microchip SAM (1).
How big is a typical board using the THS7374?
The median is 105 × 62.5 mm, and 69% are two-layer designs.
What is the most popular open source board using the THS7374?
By GitHub stars, MegaAV Pro VA0 by RIP-Felix, with 49 stars.
Can I simulate one of these boards using the THS7374 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.