UnifiedBreakout
About the UnifiedBreakout PCB
UnifiedBreakout is an open source PCB design by jamwaffles, published on GitHub. It is a 2-layer board measuring 149.9 × 103 mm, with 41 components from 20 distinct parts.
Other key parts include the ILD74, G3VM-61A1 and 4N35. By type, the board carries 20 resistors, 7 ICs, 7 connectors, 4 capacitors and 3 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
LinuxCNC config and scripts for my DIY CNC machine
LinuxCNC config and scripts for my DIY CNC machine
Better than Samba. sudo apt install nfs-common
Main components on the UnifiedBreakout
UnifiedBreakout bill of materials (BOM)
41 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | ILD74 Vishay | DIP-8_W7.62mm_LongPads | U1, U2, U3 |
| 3 | G3VM-61A1 Omron | DIP-4_W7.62mm | U4, U5, U6 |
| 1 | 4N35 Vishay | DIP-6_W7.62mm | U7 |
| 1 | 61202621621 ARGON J5 WURTH ELECTRONIK | IDC-Header_2x13_P2.54mm_Vertical | J3 |
| 1 | SS71800-041F ~ Stewart Connector | SS71800-041F | J4 |
| 1 | 1757242 24V BUS PHOENIX CONTACT | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J6 |
| 1 | 1757255 DRAWBAR+MIST+AXIS_PWR PHOENIX CONTACT | PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J7 |
| 1 | 1757255 LIMIT PHOENIX CONTACT | PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J8 |
| 1 | 1757255 AUX PHOENIX CONTACT | PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal | J9 |
| 1 | 178-025-513R571 DB25_Receptacle_Dual NORCOMP | NorComp-Dual-DB25 | J10 |
| 1 | MCL034GD MESA P3 PWR MULTICOMP PRO | LED_D3.0mm | D1 |
| 1 | MCL034GD MESA P2 PWR MULTICOMP PRO | LED_D3.0mm | D2 |
| 1 | MCL034MT +24V MULTICOMP PRO | LED_D3.0mm | D3 |
| 2 | K104K15X7RF53H5 100n Vishay | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C3 |
| 2 | 35RX30100M8X11.5 100uF Rubycon | CP_Radial_D8.0mm_P3.50mm | C2, C4 |
| 8 | MF25 2K2 2K2 MULTICOMP PRO | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7, R9, R16, R18, R19 |
| 6 | MF25 10K 10K MULTICOMP PRO | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8, R10, R20 |
| 2 | MF25 220R 220R MULTICOMP PRO | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R12 |
| 3 | MF25 680R 680R MULTICOMP PRO | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R15 |
| 1 | MF25 220K 220K MULTICOMP PRO | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
UnifiedBreakout design files
The KiCad project lives in the jamwaffles/CNCMachine repository on GitHub; these links point at the commit this page was built from.
UnifiedBreakout: common questions
How big is the UnifiedBreakout PCB?
The UnifiedBreakout measures 149.9 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UnifiedBreakout?
41 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UnifiedBreakout design files?
From the jamwaffles/CNCMachine repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the UnifiedBreakout design in my own project?
The repository has no license, so all rights stay with jamwaffles. Use it as a reference, and ask the author before reusing the design.
More boards in CNCMachine
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
11ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979