Breakout
About the Breakout
Breakout is an open source PCB design by jamwaffles, published on GitHub. It is a 2-layer board measuring 340.4 × 153 mm, with 48 components from 35 distinct parts.
By type, the board carries 13 resistors, 10 connectors, 8 diodes, 5 capacitors, 4 jumpers and 3 transistors.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
LinuxCNC config and scripts for my DIY CNC machine
LinuxCNC config and scripts for my DIY CNC machine
Better than Samba. sudo apt install nfs-common
Breakout bill of materials (BOM)
48 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | BC547 | TO-92_Inline_Wide | Q1, Q2, Q3 |
| 1 | PC | DB_25F | X1 |
| 1 | 5566-24 | Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical | X2 |
| 1 | DA15_RECEPTACLE_MOUNTINGHOLES XMOT | 6p6c | J1 |
| 1 | DA15_RECEPTACLE_MOUNTINGHOLES YMOT | 6p6c | J2 |
| 1 | 61202621621 ZMOT | 6p6c | J3 |
| 1 | SS71800-041F DRAWBAR | kk156_26-60-4020 | J4 |
| 1 | 5747846-4 SPINDLE_ENC | 6p6c | J5 |
| 1 | 1757242 MIST | kk156_26-60-4020 | J6 |
| 1 | 1757255 M_PWR_IN | kk156_26-60-4030 | J7 |
| 1 | 1757255 M_PWR_OUT | kk156_26-60-4030 | J8 |
| 1 | 1757255 DB25_Female_MountingHoles | DB_25F | J9 |
| 1 | DB25_RECEPTACLE_DUAL DB25_Female_MountingHoles | DB_25F | J10 |
| 1 | PROBE | rca_yellow | JP1 |
| 1 | LIMX | rca_black | JP2 |
| 1 | LIMY | rca_black | JP3 |
| 1 | LIMZ | rca_black | JP4 |
| 3 | JW2 | Relay_DPDT_Panasonic_JW2 | RL1, RL2, RL3 |
| 2 | MCL034GD 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | MCL034MT 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRAWBAR | LED_D3.0mm | D4 |
| 1 | MIST | LED_D3.0mm | D5 |
| 1 | MTR_PWR | LED_D3.0mm | D6 |
| 1 | PC_STBY | LED_D3.0mm | D7 |
| 1 | ATX_STBY | LED_D3.0mm | D8 |
| 1 | 100N 100n | C_Rect_L7.0mm_W2.5mm_P5.00mm | C1 |
| 2 | 100UF 100n | C_Disc_D8.0mm_W2.5mm_P5.00mm | C2, C4 |
| 1 | 100N 220uF | CP_Radial_D8.0mm_P3.80mm | C3 |
| 1 | 220uF | CP_Radial_D8.0mm_P3.80mm | C5 |
| 3 | 2K2 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R7, R9 |
| 4 | 10K 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8 |
| 2 | 2K2 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5 |
| 1 | 10K 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 2 | 220R 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R12 |
| 1 | 680R 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
Breakout design files
The KiCad project lives in the jamwaffles/CNCMachine repository on GitHub; these links point at the commit this page was built from.
Breakout: common questions
How big is the Breakout?
The Breakout measures 340.4 × 153 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakout?
48 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breakout design files?
From the jamwaffles/CNCMachine repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Breakout design in my own project?
The repository has no license, so all rights stay with jamwaffles. Use it as a reference, and ask the author before reusing the design.
More boards in CNCMachine
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k