USB-C-Screen-Adapter-LDR6023SS
About the USB-C-Screen-Adapter-LDR6023SS PCB
USB-C-Screen-Adapter-LDR6023SS is an open source PCB design by Jana-Marie, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 31 × 34.4 mm, with 40 components from 26 distinct parts.
Other key parts include the NE555, TPS61160A, 1117-3.3, SY7200AABC and AMS1117-3.3. By type, the board carries 17 capacitors, 9 resistors, 6 ICs, 3 diodes, 2 connectors and 2 inductors.
It belongs with the displays & leds designs in this gallery.
From the project
DisplayPort to Ipad 3/4 panel adapter
It turns out that modern screens/panels like the LP097QX1-SPA1 from LG have a eDP interface, which is only DP (DisplayPort) but without a standard connector. You can buy such a screen for ~40€ and with the OtterScreenAdapter (part cost: ~10€) you can convert it into an external 2048x1536px monitor.
Main components on the USB-C-Screen-Adapter-LDR6023SS
USB-C-Screen-Adapter-LDR6023SS bill of materials (BOM)
40 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555 5022505191 | 5022505191 | U2 |
| 1 | TPS61160A LDR6023SS | TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | TPS61160A USBLC6-4 | SOT-23-6 | U4 |
| 1 | 1117-3.3 SY7200AABC | SOT-23-6 | U5 |
| 1 | SY7200AABC | SOT-23-6 | U6 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | 47272-0001 USB_C_Receptacle | USB_C_24P_SMD | J1 |
| 1 | TYPE-C-31-M-17 USB | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | BRIGHTNESS | K3-2235S-K1 | SW1 |
| 1 | SS34LWRVG LED | LED_0603_1608Metric | D2 |
| 1 | SS34LWRVG SM4007PL | D_SOD-123F | D3 |
| 1 | SM4007PL | D_SOD-123F | D4 |
| 2 | 732-10762-1 22uH | L_Taiyo-Yuden_MD-4040 | L1, L2 |
| 1 | 490-3886-1 100n | C_0603_1608Metric | C4 |
| 3 | 478-1403-1 100n | C_0402_1005Metric | C5, C7, C8 |
| 1 | 490-3886-1 100n | C_0402_1005Metric | C6 |
| 1 | 478-1403-1 100n | C_0603_1608Metric | C9 |
| 2 | 490-1293-1 2.2uF | C_0805_2012Metric | C10, C11 |
| 9 | 2.2uF | C_0805_2012Metric | C12, C13, C14, C15, C16, C17, C18, C19 +1 |
| 2 | YAG2741 1k | R_0402_1005Metric | R1, R2 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | P0.0G 1k | R_0402_1005Metric | R3 |
| 1 | P0.0G 10k | R_0603_1608Metric | R4 |
| 1 | 311-100HR 10k | R_0603_1608Metric | R5 |
| 2 | HCJ0805ZT0R00 1.6 | R_0805_2012Metric | R6, R7 |
| 1 | RK14J12R0A0C 1k | R_0402_1005Metric | R8 |
| 1 | 1k | R_0402_1005Metric | R9 |
USB-C-Screen-Adapter-LDR6023SS design files
The KiCad project lives in the Jana-Marie/OtterScreenAdapter repository on GitHub; these links point at the commit this page was built from.
USB-C-Screen-Adapter-LDR6023SS: common questions
How big is the USB-C-Screen-Adapter-LDR6023SS PCB?
The USB-C-Screen-Adapter-LDR6023SS measures 31 × 34.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-C-Screen-Adapter-LDR6023SS?
40 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-C-Screen-Adapter-LDR6023SS design files?
From the Jana-Marie/OtterScreenAdapter repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the USB-C-Screen-Adapter-LDR6023SS design in my own project?
Yes, under the terms of its GPL-3.0 license, which Jana-Marie chose for the repository.
atopile
AxxAxx
eez-open